topic Re: Unable to set cluster value in ZBPro Configuration Editor in MCUXpresso in MCUXpresso IDE

Unable to set cluster value in ZBPro Configuration Editor in MCUXpresso

anthony_r_myers — Tue, 18 Aug 2020 18:24:19 GMT

I'm trying to add a TemperatureMeasurement cluster to a JN5189 project using the ZigBee Pro (ZBPro) Configuration Editor in MCUXpresso, but I'm unable to set the cluster value to 0x0402. As soon as I enter a value, then leave the text box, the value resets to 0x0000. I've tried pressing Enter and Tab to get it to accept the change, but nothing seems to work. Am I doing something wrong, or is anyone else seeing the same behavior?

Re: Unable to set cluster value in ZBPro Configuration Editor in MCUXpresso

mario_castaneda — Thu, 20 Aug 2020 18:03:23 GMT

Hi Anthony,

I reproduced this issue. I am checking this and I will get back to you as soon as possible.

Regards,

Mario

Re: Unable to set cluster value in ZBPro Configuration Editor in MCUXpresso

mario_castaneda — Mon, 14 Sep 2020 14:57:22 GMT

Hi,

I already reported this issue, we are working on this.

In the meantime, you could modify this value using a text editor.

Sorry for any inconvenience that this may cause you.

Regards,

Mario