MCUXpresso IDEのトピックRestart Button enable

Restart Button enable

claudiobrunelli — Tue, 05 Nov 2019 08:11:16 GMT

In the debug perspective I can't use the restart button, due to fact it's not enabled.

But in the customized perspective it's still enabled. There is something different to set ?

Re: Restart Button enable

lpcxpresso_supp — Tue, 05 Nov 2019 15:08:52 GMT

It should be enabled. Please note that its enablement depends on the currently selected context from Debug view. In other words, you'll have to select the thread or the main process, not the top-level item associated with the debug configuration.

Greetings,
MCUXpresso IDE Support

Re: Restart Button enable

claudiobrunelli — Tue, 12 Nov 2019 08:46:29 GMT

I have tried several times also on two different PC host but this button is always disabled.

I can see the button enable only when MCUXpresso starts up for the first time.
But as I launching the debug function it becomes grey and it's impossible to use it.
I don't know out to fix.

The only thing I can do, it's to reload every time the debugger but test and debug time increase a lot.

Thanks for other suggestion if you think I can do other.

Claudio

Re: Restart Button enable

lpcxpresso_supp — Wed, 13 Nov 2019 07:43:00 GMT

Please confirm that you select the proper context in Debug view. Please attach a screenshot of the entire IDE when button is disabled.

Also, please attach the .log file from your workspace. Maybe we can get a clue of the failure.

Please also provide answers to the following questions:

1. What IDE version are you using?

2. What board/MCU are you using?

3. Is the problem encountered with a new project created with the IDE?

4. When using the Develop perspective, is the Restart button enabled?

Greetings,
MCUXpresso IDE Support

Re: Restart Button enable

claudiobrunelli — Wed, 13 Nov 2019 11:07:42 GMT

Good morning and thanks.

1) IDE version is 11.0.1

2) Board is FRDMK27

3) Yes

4) No it's not enabled.

Re: Restart Button enable

claudiobrunelli — Wed, 20 Nov 2019 15:12:39 GMT

Hi,

Any news about the restart button ?

Thanks.

Claudio

Re: Restart Button enable

lpcxpresso_supp — Fri, 22 Nov 2019 07:26:25 GMT

So far, we've been unable to reproduce the problem. However, a small refactoring that included the Restart toolbar/button has been done for the upcoming v11.1.0 release.

Greetings,
MCUXpresso IDE Support

Re: Restart Button enable

claudiobrunelli — Fri, 22 Nov 2019 09:55:11 GMT

I take note about your answer. Just to clarify than, I send you other screenshot where there's my xpresso release.
If you have news about this strange problem, please advice me. Thanks a lot.

Claudio

Re: Restart Button enable

hau-zensze — Mon, 23 Dec 2019 08:06:32 GMT

Restart button is still not working at new version (11.1.0).

Re: Restart Button enable

claudiobrunelli — Tue, 24 Dec 2019 07:45:47 GMT

Hi Hau-Zen.

You are right. In the relese v11.0.1_2563 the restart button doesn't work yet.

I hope they can do something quickly because my firmware is growing up and is rather troublesome to reload everytime the firmware.

Thanks for your answer.

Claudio

Re: Restart Button enable

claudiobrunelli — Fri, 10 Jan 2020 08:55:07 GMT

Hi.

Did you do something for restart button ?

I have just installed the latest version of mcux presso v11.1.0 [build3209] [2019-12-12] but this button doesn't work yet.

I tried this release on a different pc too, this time portable, but nothing.

Any news about it ?

Thanks.

Claudio

Re: Restart Button enable

lpcxpresso_supp — Fri, 10 Jan 2020 13:32:19 GMT

We cannnot reproduce any problems with the Restart button.

Please can you try selecting different levels within the Debug View, and see if this causes it to be reenabled. Please also confirm what host OS you are running, and what debug probe you are connected through, and to what target MCU.

Also, if you use the right click menu in the Debug View, do you see the Restart option in that menu being active?

Regards,

MCUXpresso IDE Support

Re: Restart Button enable

claudiobrunelli — Fri, 10 Jan 2020 15:05:27 GMT

I tried more times to change debug level, but this is the result shown in the attached file.

My OS is Window 10 pro 10.0.17134, build 17134.

I'm using the Freedom Board KL27 based on MKL27Z64 and the debug port is the OpenSDA port.

Nothing more.

This problem happen both with my own project and a projects totally generated by the wizard.

Thank you for your assistance.

Claudio

Re: Restart Button enable

lpcxpresso_supp — Mon, 13 Jan 2020 11:09:15 GMT

So we are still unable to replicate. Our assumption is that something you have done in modifying your views / perspectives must have triggered the problem (though we don't yet understand what).

It might be helpful if you could create a completely new workspace, use the standard Develop perspective, and debug a standard project. Can you confirm if restart then works correctly?

And if you then import your actual project into that new workspace (but delete the .launch files) - does restart then work correctly?

Regards,

MCUXpresso IDE Support

Re: Restart Button enable

claudiobrunelli — Tue, 14 Jan 2020 10:43:05 GMT

Good morning team

I'm sorry but this test was already done. I took a new pc where never mcu xpresso was installed. And the button doesn't working yet.

It was a new project completely created by the wizard for the FRDMK27.

I don't know what happen to this button.

It would be better if it works but.....

Claudio

Re: Restart Button enable

soledad — Wed, 05 Feb 2020 00:32:05 GMT

Hello Claudio,

Something that I see that sometimes happen, it is if you already have another IDE based on Eclipse, they took the configuration of the perspective from another IDE and provide the issue.

Re: Restart Button enable

claudiobrunelli — Fri, 07 Feb 2020 08:46:15 GMT

Hi Soledad

Thanks four your support. May be. Infact I tried on different pc but everyone had already installed a compiler such as kds & codewarrior.

In the next day I'm going to try on a still different machine. I keep you informed.

Have a nice weekend.

Claudio

Re: Restart Button enable

arnogir — Wed, 19 Feb 2020 07:17:06 GMT

Hello

I'm a new user of MCUXpresso, Before I used codewarrior and KDS.

I have the same issue about the restart button and O'm intersted to find a way to have this button enabled!

Thank

Re: Restart Button enable

claudiobrunelli — Thu, 20 Feb 2020 15:33:10 GMT

Hi Arnaud.

Thanks for your feedback.

In the next days I'm going to re-write to the MCUxpresso support to understand if there are news or not yet.

MCU xpressso in my opinion it's a good tool but this situation is getting a little boring.

I keep you informed.

Have a good time.

Claudio

Re: Restart Button enable

hau-zensze — Mon, 30 Mar 2020 02:27:46 GMT

About the restart button problem, my approach is that

1. install the version 10.3.1_2233 first (just the version before 11.0.1), and than it will generate a work space associated this version.

2. install the last version of MCUXpressoIDE (11.1.1_3241). But now, using the old version work space which generated by step 1.

3. the restart button working, amazing!