topic Re: Refresh automatically before build in MCUXpresso IDE

Refresh automatically before build

kensu — Wed, 05 Apr 2017 01:54:50 GMT

Hi,

For MCUXpresso, how to refresh automatically every time before build?

Because I don't want to refresh manually the project while I add a source code file.

Thanks

Ken

Re: Refresh automatically before build

BlackNight — Wed, 05 Apr 2017 07:27:47 GMT

Hi Ken,

I solved that problem in the past and solved it with a custom builder. I would need some time tonight to write it up. I hope it can wait for a few hours.

Erich

Re: Refresh automatically before build

lpcxpresso_supp — Wed, 05 Apr 2017 09:06:52 GMT

How exactly are you adding new source files? If you create new files within the IDE itself, or drag'n'drop files from Windows Explorer (etc) into the project inside the IDE's Project Explorer view - then the new files should automatically be detected.

Regards,

MCUXpresso IDE Support

Re: Refresh automatically before build

BlackNight — Wed, 05 Apr 2017 09:17:56 GMT

I believe his problem case is that the extra file(s) are created outside the IDE, and that way the IDE is not aware it and does not included.

Erich

Re: Refresh automatically before build

kensu — Wed, 05 Apr 2017 09:41:41 GMT

Hi Erich

Yes, sometimes, team members may add source code outside IDE (ex: SVN), so I want to know how to set.

Thanks for your support, I will wait.

Ken

Re: Refresh automatically before build

BlackNight — Wed, 05 Apr 2017 19:38:04 GMT

Hi Ken,

hopefully this is what you are looking for:

Automatically Refresh Eclipse Projects before Build | MCU on Eclipse

Erich

Re: Refresh automatically before build

kensu — Thu, 06 Apr 2017 06:29:32 GMT

Hi Erich

Thanks a lot.

This article solved my problem.

Ken