topic Error Failed on chip setup Ep(04). Cannot halt processor. LPCXpresso54608 Board in MCUXpresso IDE https://community.nxp.com/t5/MCUXpresso-IDE/Error-Failed-on-chip-setup-Ep-04-Cannot-halt-processor/m-p/833289#M3180 <HTML><HEAD></HEAD><BODY><P>Pleas somebody can help me I was working fine with my proyect but this error appeared.</P><P>The windows that shows the issue reports this:</P><P></P><P>Error in final launch sequence<BR />Failed to execute MI command:<BR />-target-select extended-remote | crt_emu_cm_redlink -msg-port=51951 -g -mi -2 -pLPC54608J512 -vendor=NXP -reset= -ProbeHandle=1 -CoreIndex=0 -cache=disable -x C:/Users/lapto/mcuxpresso/01/.mcuxpressoide_packages_support/LPC54608J512_support --flash-dir C:/Users/lapto/mcuxpresso/01/.mcuxpressoide_packages_support/LPC54608J512_support/Flash --telnet 3335<BR />Error message from debugger back end:<BR />Remote communication error. Target disconnected.: Success.<BR />Remote communication error. Target disconnected.: Success.</P><P></P><P>I had been working before with this board and It had happened but I fixed it running a program with LPCXpresso but now I can fix it. Please could somebody help me?</P></BODY></HTML> Mon, 17 Sep 2018 22:54:25 GMT oscarniño 2018-09-17T22:54:25Z Error Failed on chip setup Ep(04). Cannot halt processor. LPCXpresso54608 Board https://community.nxp.com/t5/MCUXpresso-IDE/Error-Failed-on-chip-setup-Ep-04-Cannot-halt-processor/m-p/833289#M3180 <HTML><HEAD></HEAD><BODY><P>Pleas somebody can help me I was working fine with my proyect but this error appeared.</P><P>The windows that shows the issue reports this:</P><P></P><P>Error in final launch sequence<BR />Failed to execute MI command:<BR />-target-select extended-remote | crt_emu_cm_redlink -msg-port=51951 -g -mi -2 -pLPC54608J512 -vendor=NXP -reset= -ProbeHandle=1 -CoreIndex=0 -cache=disable -x C:/Users/lapto/mcuxpresso/01/.mcuxpressoide_packages_support/LPC54608J512_support --flash-dir C:/Users/lapto/mcuxpresso/01/.mcuxpressoide_packages_support/LPC54608J512_support/Flash --telnet 3335<BR />Error message from debugger back end:<BR />Remote communication error. Target disconnected.: Success.<BR />Remote communication error. Target disconnected.: Success.</P><P></P><P>I had been working before with this board and It had happened but I fixed it running a program with LPCXpresso but now I can fix it. Please could somebody help me?</P></BODY></HTML> Mon, 17 Sep 2018 22:54:25 GMT https://community.nxp.com/t5/MCUXpresso-IDE/Error-Failed-on-chip-setup-Ep-04-Cannot-halt-processor/m-p/833289#M3180 oscarniño 2018-09-17T22:54:25Z Re: Error Failed on chip setup Ep(04). Cannot halt processor. LPCXpresso54608 Board https://community.nxp.com/t5/MCUXpresso-IDE/Error-Failed-on-chip-setup-Ep-04-Cannot-halt-processor/m-p/833290#M3181 <HTML><HEAD></HEAD><BODY><P>Try this FAQ:</P><P></P><P><A href="https://community.nxp.com/thread/389112">https://community.nxp.com/thread/389112</A>&nbsp;</P></BODY></HTML> Tue, 18 Sep 2018 08:55:36 GMT https://community.nxp.com/t5/MCUXpresso-IDE/Error-Failed-on-chip-setup-Ep-04-Cannot-halt-processor/m-p/833290#M3181 converse 2018-09-18T08:55:36Z