NXP IDE check/uncheck settings issue

vishnubeema — Wed, 14 Mar 2018 17:00:36 GMT

Hello,

I am importing examples using “Import SDK examples…” option. Issue I am facing is once import by selecting the options highlighted and then if I want to un-select the option how to do so.

Currently I am deleting the project and creating new project and during that I am unselecting. I want to avoid this tedious job.

Thanks & Regards

Vishnu Beema

Re: NXP IDE check/uncheck settings issue

lpcxpresso_supp — Thu, 15 Mar 2018 08:27:34 GMT

At the simplest level you can change whether an SDK project sends output via semihosting or UART by modifying the values of the defines SDK_DEBUGCONSOLE and SDK_DEBUGCONSOLE_UART. See the MCUXpresso IDE v10.1 User Guide, section 13.5.5, "Printf when using SDK", for more details.

But the easiest way to change UART / Semihosting is to select your project in the Project Explorer view, then go to

QuickStart Panel -> Quick Settings -> SDK Debug Console

and select "Semihost console" or "UART console" as required. (See section 16.1, "Quick Settings" of the User Guide for more details).

Regards,

MCUXpresso IDE Support

topic Re: NXP IDE check/uncheck settings issue in MCUXpresso IDE

NXP IDE check/uncheck settings issue

Re: NXP IDE check/uncheck settings issue