https://community.nxp.com/t5/MCUXpresso-IDE/RedlinkServer-pull-down-menu-for-build-in-commands-no-longer/m-p/759838#M2082 <HTML><HEAD></HEAD><BODY><P>Thank you for the report, we'll investigate.</P><P></P><P>Regards,</P><P>MCUXpresso IDE Support</P></BODY></HTML> Thu, 15 Mar 2018 11:05:46 GMT lpcxpresso_supp 2018-03-15T11:05:46Z https://community.nxp.com/t5/MCUXpresso-IDE/RedlinkServer-pull-down-menu-for-build-in-commands-no-longer/m-p/759837#M2081 <HTML><HEAD></HEAD><BODY><P>During a debugging session one can select the RedlinkServer console for issuing commands to the RedlinkServer. With earlier versions of MCUXpresso this console also enabled a pull-down menu that allowed for selecting build in commands/actions. The button for the pull-down menu is still visible (not greyed), but it no longer allows for pulling down...&nbsp; (see attached picture)&nbsp; Is this a bug ? Or is this feature discontinued ?</P></BODY></HTML> Thu, 15 Mar 2018 08:01:35 GMT https://community.nxp.com/t5/MCUXpresso-IDE/RedlinkServer-pull-down-menu-for-build-in-commands-no-longer/m-p/759837#M2081 roberthulsebos 2018-03-15T08:01:35Z https://community.nxp.com/t5/MCUXpresso-IDE/RedlinkServer-pull-down-menu-for-build-in-commands-no-longer/m-p/759838#M2082 <HTML><HEAD></HEAD><BODY><P>Thank you for the report, we'll investigate.</P><P></P><P>Regards,</P><P>MCUXpresso IDE Support</P></BODY></HTML> Thu, 15 Mar 2018 11:05:46 GMT https://community.nxp.com/t5/MCUXpresso-IDE/RedlinkServer-pull-down-menu-for-build-in-commands-no-longer/m-p/759838#M2082 lpcxpresso_supp 2018-03-15T11:05:46Z