topic &quot;Error in final launch sequence&quot; when using debug on hello world app for first time - k64f in MCUXpresso IDE https://community.nxp.com/t5/MCUXpresso-IDE/quot-Error-in-final-launch-sequence-quot-when-using-debug-on/m-p/759096#M2074 <HTML><HEAD></HEAD><BODY><P>I followed the instruction videos to install the NXP software, IDE and drivers. When i ran the hello world app in debug mode, i got an error message "Error in final launch sequence" and the details of the error was as follows:</P><P></P><P>Error in final launch sequence<BR />Error: Read timed out<BR />LinkServer has been terminated and will be restarted.<BR />Please restart your debug session.<BR />If the problem recurs, please power cycle your debug probe and restart MCUXpresso IDE.<BR />Error: Read timed out<BR />LinkServer has been terminated and will be restarted.<BR />Please restart your debug session.<BR />If the problem recurs, please power cycle your debug probe and restart MCUXpresso IDE.</P><P></P><P>I've only just purchased this and would appreciate a solution. Thanks</P></BODY></HTML> Thu, 25 Jan 2018 18:42:07 GMT jamieghoorbin 2018-01-25T18:42:07Z "Error in final launch sequence" when using debug on hello world app for first time - k64f https://community.nxp.com/t5/MCUXpresso-IDE/quot-Error-in-final-launch-sequence-quot-when-using-debug-on/m-p/759096#M2074 <HTML><HEAD></HEAD><BODY><P>I followed the instruction videos to install the NXP software, IDE and drivers. When i ran the hello world app in debug mode, i got an error message "Error in final launch sequence" and the details of the error was as follows:</P><P></P><P>Error in final launch sequence<BR />Error: Read timed out<BR />LinkServer has been terminated and will be restarted.<BR />Please restart your debug session.<BR />If the problem recurs, please power cycle your debug probe and restart MCUXpresso IDE.<BR />Error: Read timed out<BR />LinkServer has been terminated and will be restarted.<BR />Please restart your debug session.<BR />If the problem recurs, please power cycle your debug probe and restart MCUXpresso IDE.</P><P></P><P>I've only just purchased this and would appreciate a solution. Thanks</P></BODY></HTML> Thu, 25 Jan 2018 18:42:07 GMT https://community.nxp.com/t5/MCUXpresso-IDE/quot-Error-in-final-launch-sequence-quot-when-using-debug-on/m-p/759096#M2074 jamieghoorbin 2018-01-25T18:42:07Z Re: "Error in final launch sequence" when using debug on hello world app for first time - k64f https://community.nxp.com/t5/MCUXpresso-IDE/quot-Error-in-final-launch-sequence-quot-when-using-debug-on/m-p/759097#M2075 <HTML><HEAD></HEAD><BODY><P>Hi Jamie,</P><P>There are many possible reasons for this error.<BR />I would suggest you test:<BR />1. To avoid old connection associations, create a NEW project in a NEW workspace. Test if this new project can connect normal then.<BR />2. check in windows task if there is any live connection still pending, if yes, kill it first.<BR />3. If both 1 and 2 can not fix the problem, please try another connection with of the board. If you use FRDM-K64 board, change other interface. Here is the link for available OpenSDA:<BR /><A href="https://www.nxp.com/support/developer-resources/run-time-software/kinetis-developer-resources/ides-for-kinetis-mcus/opensda-serial-and-debug-adapter:OPENSDA?&amp;tid=vanOpenSDA">https://www.nxp.com/support/developer-resources/run-time-software/kinetis-developer-resources/ides-for-kinetis-mcus/opensda-serial-and-debug-adapter:OPENSDA?&amp;tid=vanOpenSDA</A></P><P><BR />Have a great day,<BR />Jennie Zhang</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Mon, 12 Feb 2018 05:51:09 GMT https://community.nxp.com/t5/MCUXpresso-IDE/quot-Error-in-final-launch-sequence-quot-when-using-debug-on/m-p/759097#M2075 ZhangJennie 2018-02-12T05:51:09Z