MCUXPresso IDE v. 10 cannot see LinkServer debugger

andreamendo — Wed, 08 Nov 2017 09:45:17 GMT

Hi,

I have both LPCXpresso v7.5.0 and MCUXpresso IDE v10.0.2 installed on my Windows 7 machine;

while the same project (based on LPC1518 mcu) is compiling and debugging fine with Redlink Server debugger, MCUXpresso IDE can't see LinkServer: the "Connect to Link Server" dialog box shows no items in "List of attached probes". I tryed reinstalling the driver, but nothing changes.

Insted, on a Linux machine debugging with MCUXPresso v10 and LinkServer is working.

Any suggestion?

Re: MCUXPresso IDE v. 10 cannot see LinkServer debugger

lpcxpresso_supp — Wed, 08 Nov 2017 10:42:00 GMT

In the first place, please read through - section 14.12, "Using and troubleshooting LPC-Link2" of the MCUXpresso IDE v10.0.2 User Guide. My suspicion is that you have VCOM driver issues, as described in section14.12.6, "LPC-Link2 failing to enumerate".

Regards,

MCUXpresso IDE Support

MCUXpresso IDEのトピックRe: MCUXPresso IDE v. 10 cannot see LinkServer debugger

MCUXPresso IDE v. 10 cannot see LinkServer debugger

Re: MCUXPresso IDE v. 10 cannot see LinkServer debugger