MCUXpresso IDE中的主题 Re: Processor Expert in MCUXpresso

Processor Expert in MCUXpresso

kaarthichandras — Tue, 06 Mar 2018 04:21:11 GMT

I am new to MCUXpresso IDE, how to use processor expert in MCUXpresso? can I use the same processor expert that I have been using in the codewarrior 10.6?

Re: Processor Expert in MCUXpresso

Alice_Yang — Tue, 06 Mar 2018 08:32:28 GMT

Hello kaarthi,

You can refer to this thread :

MCUXpresso IDE: Installing Processor Expert into Eclipse Neon | MCU on Eclipse

Hope it helps

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Processor Expert in MCUXpresso

kaarthichandras — Wed, 07 Mar 2018 08:44:55 GMT

Hello Alice,

I have followed all the steps mentioned i that thread and succesfully installed all, but when tried to created a processor expert project with controller MKV10Z32VLC7, it shows the following problem,

Thanks in advance,

Kaarthi

Re: Processor Expert in MCUXpresso

liborukropec — Wed, 07 Mar 2018 13:14:53 GMT

Hello Kaarthi,

this is known issue with installing Processor Expert into the MCUXpresso IDE (conflict between Processor Expert and Config Tools), which will be addressed in the next release this year. Until the next version the Processor Expert has to be installed and used in another Eclipse instance and generated sources copied manually into the MCUXpresso IDE.

Regards,

Libor

Re: Processor Expert in MCUXpresso

BlackNight — Wed, 07 Mar 2018 14:35:55 GMT

Hi Kaarthi,

as mentioned in MCUXpresso IDE: Installing Processor Expert into Eclipse Neon | MCU on Eclipse , there is a conflict with the Config tools. As a workaround you could uninstall the Config tools (which are part of this Eclipse installation). But then you won't have the config tools in MCUXpresso, you would need to use the external config tools.

Erich

Re: Processor Expert in MCUXpresso

kaarthichandras — Fri, 09 Mar 2018 10:15:25 GMT

Hi,

Thanks Erich, I got fixed the problem by using MCUXpresso 10.0. What I have to do, if I want both SDK and Processor expert..

Regards,

Kaarthi

Re: Processor Expert in MCUXpresso

BlackNight — Fri, 09 Mar 2018 15:41:07 GMT

The easiest thing is if you use either Processor Expert or the SDK. You can use the SDK 1.3 (but this one is outdated) with Processor Expert. If you want to use Processor Expert with the SDK 2.x, you have to use the approach described in Tutorial: Using Eclipse with NXP MCUXpresso SDK v2 and Processor Expert | MCU on Eclipse

I hope this helps,

Erich

Re: Processor Expert in MCUXpresso

kaarthichandras — Wed, 14 Mar 2018 09:18:13 GMT

Thanks Erich,

When I tried to use config tools in MCUXpresso, the following error occured

But I have the internet connection.

B/w I tried MCUXpresso configuration tools also and the error,

Regards,

kaarthi

Re: Processor Expert in MCUXpresso

liborukropec — Wed, 14 Mar 2018 12:46:45 GMT

Hello,

could you please

1) check that C:\ProgramData\NXP is writable by non-admin user? If not, add rights or try to delete this NXP folder, it should be recreated again with proper rights.

2) Post here the c:\Users\<username>\.nxp\swtools.log

3) are you behind a proxy?

The message "Cannot download data" might be issue either with connection, or with the disk access permission.

Regards,

Libor

Re: Processor Expert in MCUXpresso

kaarthichandras — Thu, 15 Mar 2018 06:37:25 GMT

Thanks,

I here attached the swtools

Re: Processor Expert in MCUXpresso

liborukropec — Thu, 15 Mar 2018 09:22:40 GMT

Hello,

so it is about the permissions to the NXP folder, so

a) C:\ProgramData\NXP is not writable for non-admin user - delete this NXP folder, it should be recreated again with proper rights.

b) or fix the access rights

c) last resort/quick workaround is to launch the config tools as an Administrator

Regards,

Libor