topic Red Probe + support into MCUXpresso in MCUXpresso IDE https://community.nxp.com/t5/MCUXpresso-IDE/Red-Probe-support-into-MCUXpresso/m-p/628160#M119 <HTML><HEAD></HEAD><BODY><P>Hello.</P><P></P><P>Does the new MCUXpresso IDE supports the old code_red Red Probe+ debugger?</P><P></P><P>Thanks in advance.</P><P>Diego.</P></BODY></HTML> Tue, 28 Mar 2017 12:12:22 GMT diegobarile 2017-03-28T12:12:22Z Red Probe + support into MCUXpresso https://community.nxp.com/t5/MCUXpresso-IDE/Red-Probe-support-into-MCUXpresso/m-p/628160#M119 <HTML><HEAD></HEAD><BODY><P>Hello.</P><P></P><P>Does the new MCUXpresso IDE supports the old code_red Red Probe+ debugger?</P><P></P><P>Thanks in advance.</P><P>Diego.</P></BODY></HTML> Tue, 28 Mar 2017 12:12:22 GMT https://community.nxp.com/t5/MCUXpresso-IDE/Red-Probe-support-into-MCUXpresso/m-p/628160#M119 diegobarile 2017-03-28T12:12:22Z Re: Red Probe + support into MCUXpresso https://community.nxp.com/t5/MCUXpresso-IDE/Red-Probe-support-into-MCUXpresso/m-p/628161#M120 <HTML><HEAD></HEAD><BODY><P>Yes, to the same level as LPCXpresso IDE v8.2.2 for Cortex-M based LPC parts, as described at:</P><P></P><P><A href="https://community.nxp.com/message/630901">https://community.nxp.com/message/630901</A>&nbsp;</P><P></P><P>But you should note that use of Red Probe+ is <STRONG>not</STRONG> supported at all for debug sessions to Kinetis MCUs.</P><P></P><P>Regards,</P><P>MCUXpresso IDE Support</P></BODY></HTML> Tue, 28 Mar 2017 15:46:44 GMT https://community.nxp.com/t5/MCUXpresso-IDE/Red-Probe-support-into-MCUXpresso/m-p/628161#M120 lpcxpresso_supp 2017-03-28T15:46:44Z