topic Re: Error!!!: Could not determine GDB version using command: gdb --version in MCUXpresso Config Tools

Error!!!: Could not determine GDB version using command: gdb --version

kpki — Thu, 20 Feb 2020 10:39:23 GMT

Error!!!: Could not determine GDB version using command: gdb --version

I get this above error while trying to debug an application which is compiled to run on X86 platform (windows 10).

The application works in 'run mode' but when launched in 'Debug mode' this error comes. Below is the version details of my MCUXpresso.

Is there any solution for the same? I have a cygwin compiler on the windows 10 PC. When i run the gdb --version in my windows terminal it correctly prints the gdb version as shown below.

Please helpout

Re: Error!!!: Could not determine GDB version using command: gdb --version

Alexis_A — Tue, 25 Feb 2020 22:04:42 GMT

Hello kpki‌,

This error in previous IDE versions was due to a problem with the paths from the debug session. Could you try installing the latest IDE version MCUXpresso 11.1.0 (check the link here) to see if this solves the issue?

Best Regards,

Alexis Andalon

Re: Error!!!: Could not determine GDB version using command: gdb --version

marek-trmac — Wed, 26 Feb 2020 07:12:23 GMT

Hi Kiran,

this is a link to MCU IDE specific community: https://community.nxp.com/community/mcuxpresso/mcuxpresso-ide .

This community is intended for Configurations tools: Pins tool, Clocks tool, Peripherals tool, DCD tool and TEE tool.

Best Regards
Marek