MCUXpresso Config ToolsのトピックRe: Error: Part-numbers do not match

Error: Part-numbers do not match

PaulTan — Mon, 28 May 2018 18:05:28 GMT

What am I doing wrong? I just created a new project from Quickstart Panel->Start here->New project, selecting FRDM-KE02Z (downloaded SDK for it), project was created without errors, then tried Right click on project -> MCUXpresso Config Tools -> Open Pins, and I get this error. Tried recreating the project, same problem. Import SDK example project works (i.e. I can select the led_blinky project and right click->MCUXpresso Config Tools -> Open Pins, and it works fine).

Please help!

Re: Error: Part-numbers do not match

Alice_Yang — Tue, 29 May 2018 09:57:23 GMT

Hello Paul,

I have reported it to development team, sorry for the inconvenient to you .

Alice

Re: Error: Part-numbers do not match

Lukas_Heczko — Tue, 29 May 2018 11:09:28 GMT

Hello,

the issue is caused by incorrect information stored in SDK package new project template, specifically, in boards\frdmke02z40m\project_template\pin_mux.c file on line 44, there is incorrect ID of the package:

To workaround the issue, in SDK package you downloaded please set package_id in boards\frdmke02z40m\project_template\pin_mux.c file to MKE02Z64VQH4 and reinstall it into MCUXpresso IDE:

We informed the SDK team about the issue to fix it.

Regards,

Lukas

Re: Error: Part-numbers do not match

PaulTan — Tue, 29 May 2018 15:24:10 GMT

Thanks! That worked!

Re: Error: Part-numbers do not match

baldurthorgilss — Wed, 27 Jun 2018 19:15:53 GMT

Thanks. Solved my problem :-)