MCUXpresso Config Tools中的主题 Re: USDHC missing in config tool

USDHC missing in config tool

mttjcksn — Sat, 20 Sep 2025 10:30:06 GMT

I'm using the latest config tool and SDK to configure a project for the M7 core of the RT1176.

There is no USDHC driver available in the config tool.

Is this expected? It is very difficult to organise code nicely when the generated code is very self-contained but doesn't include all required peripherals.

Thanks

Re: USDHC missing in config tool

mayliu1 — Mon, 22 Sep 2025 06:57:54 GMT

Hi @mttjcksn ,

Thank you so much for your interest in our products and for using our community.

I import an SDK demo "evkbmimxrt1170_sdcard_freertos_cm7", in this demo, There is USDHC driver available in the config tool.

IDE version: MCUXPresso IDE 25.6

SDK version: MIMXRT1170-EVKB 25.6

I think you can refer to this demo.

Wish it helps you.
If you still have question about it, please kindly let me know.

Best Regards

MayLiu

Re: USDHC missing in config tool

mttjcksn — Mon, 22 Sep 2025 07:44:28 GMT

Hi MayLiu, thanks for the reply. Your screenshot shows the pin configuration, I was referring to the peripheral driver. I don't see the peripheral listed in the peripheral view.

Many thanks

Re: USDHC missing in config tool

mayliu1 — Wed, 24 Sep 2025 09:02:12 GMT

Hi @mttjcksn ,

Thanks for your patience.

I check your issue with relevant Team.

The USDHC support is unfortunately not planned, as we have limited bandwidth for supporting the large scope of SDK.

The SD access is part of the middleware so we suggest you can have a look on the middleware examples related to that topic.

We apologize for any inconvenience caused.

Best Regards

MayLiu