MCUXpresso Config ToolsのトピックRe: USB configuration created by ConfigTools

USB configuration created by ConfigTools

danielkrol — Sun, 23 Feb 2025 14:08:11 GMT

Hello,
When creating a new project using ConfigTools for USB there is a problem with a missing resource and there is no way to add it:

The problem appeared since SDK 24.12.00. MCUXpresso for macOS. Tested for LPC55s69, MCX A153 and MCX N947.

Regards,

Daniel

Re: USB configuration created by ConfigTools

Alice_Yang — Mon, 24 Feb 2025 10:00:44 GMT

Hello @danielkrol

Please add the USB device CDC driver in the following way: Navigate to "Manage SDK Components", then select "USB middleware" and choose "USB CDC". The steps are shown as follows:

Alice

Re: USB configuration created by ConfigTools

danielkrol — Mon, 24 Feb 2025 10:15:35 GMT

Hello,

I know about that - all drivers are added. Even projects created in older versions of SDK stopped working.

If I restore SDK 2.16.000 - everything works OK.

Regards
Daniel

Re: USB configuration created by ConfigTools

danielkrol — Wed, 26 Feb 2025 10:25:18 GMT

Perhaps this matters - the problem occurs in MCUXpresso on macOS (Apple Silicon).

BR
Daniel

Re: USB configuration created by ConfigTools

Alice_Yang — Fri, 28 Feb 2025 02:59:47 GMT

Hello @danielkrol

Thank you for your question.

I have confirmed with internal Configure tool team. " MCUXpresso Config Tools 24.12.00 does not support the latest USB SDK middleware driver present in MCUXpresso SDK 24.12.00. The SDK 24.12.00 contains USB driver version 2.11.0, however, the Peripherals tool supports only drivers up to version 2.10.0. This issue is going to be fixed in MCUXpresso Config Tools 25.03.00 which will be released in second half of the March." Sorry for the inconvenience for you. So now, you can use SDK2.16.0.

Alice

Re: USB configuration created by ConfigTools

danielkrol — Fri, 28 Feb 2025 04:31:01 GMT

Hello,

OK, thank you!

BR
Daniel

Re: USB configuration created by ConfigTools

danielkrol — Mon, 28 Apr 2025 16:04:38 GMT

Hello,

the problem is still not fixed in SDK 25.03.00. There is the same error!

Regards
Daniel

Re: USB configuration created by ConfigTools

Alice_Yang — Wed, 14 May 2025 05:48:37 GMT

Hello @danielkrol

I'd like to share an update on this issue. I got a method from the MCUXpresso Config tool team, as shown below.

Please update Config Tools inside MCUXpresso IDE 24.12 to Config Tools 25.03:

In MCUXpresso IDE, go to Help > Install New Software > Manage and enable the MCUXpresso Config Tools Update Site

2. Click Apply and Close and go to Help > Check for Updates. A new version of Config Tools will be available for installation. Finish the update using the update wizard.

Thank you.

Alice