topic Re: MCUXpresso Software Development Kit in MCUXpresso Config Tools

MCUXpresso Software Development Kit

saeidsaeidi — Mon, 07 Aug 2017 15:35:31 GMT

Hi,

I am trying to download "MCUXpresso Software Development Kit", however after many times trying, it seems that there is a Problem with the download link?

Thanks and regards!

Saeid

Re: MCUXpresso Software Development Kit

Carlos_Mendoza — Tue, 08 Aug 2017 21:40:12 GMT

Hi Saeid,

Which error do you get while trying to download it?

Are downloading the SDK package from this page?

Welcome to MCUXpresso | MCUXpresso Config Tools

Please take a look at this guide on how to generate a SDK package:

https://community.nxp.com/docs/DOC-333304

Hope it helps!

Best Regards,
Carlos Mendoza
Technical Support Engineer

Re: MCUXpresso Software Development Kit

saeidsaeidi — Wed, 09 Aug 2017 09:29:54 GMT

Hi Carlos,

thank you very much for the Information. In fact I would like to download the MCUXpresso Software Development Kit (SDK) which is described here:

http://www.nxp.com/products/developer-resources/run-time-software/mcuxpresso-software-and-tools/mcuxpresso-software-development-kit-sdk:MCUXpresso-SDK

I used the download link:

http://www.nxp.com/products/developer-resources/run-time-software/mcuxpresso-software-and-tools/mcuxpresso-software-development-kit-sdk:MCUXpresso-SDK?&tab=Design_Tools_Tab

However there is no download file available.

It should be an aternative to IAR tool?

The link for the SDK Builder works fine and I could generate a configuration for the microcontroller and use it in IAR. But I am looking for free aternative SDK to IAR.

Best regards

Saeid

Re: MCUXpresso Software Development Kit

Carlos_Mendoza — Wed, 09 Aug 2017 13:56:19 GMT

Hi Saeid,

There should not be a download link since the SDK package needs to be built specifically for your processor, evaluation board, OS, IDE and with the needed middleware in order to download it. This seems to be a problem with the webpage, I will report is to our web team.

If you want to use the SDK with IAR then you should select IAR as IDE in the configuration settings:

Hope it helps!

Best Regards,
Carlos Mendoza
Technical Support Engineer

Re: MCUXpresso Software Development Kit

marek-trmac — Mon, 14 Aug 2017 11:49:32 GMT

Hi Saeid,

this community is related to MCUXpresso Config Tools.

Here is the link to SDK community: https://community.nxp.com/community/mcuxpresso/kinetis-software-development-kit

To download SDK v2.x use http://mcuxpresso.nxp.com/

Regards

Marek