topic Re: Peripheral not visible in configuration tool in MCUXpresso Config Tools

Peripheral not visible in configuration tool

jtro9 — Wed, 18 Apr 2018 08:38:46 GMT

MCU: LPC54616J512BD100

IDE: MCUXpresso IDE v10.1.1 [Build 606] [2018-01-02]

SDK: all peripherals and function enable

Problem: In configuration tool -> Peripherals only few peripherals are available (see attachment).

How to see other peripherals as i need to configure CAN, Watchdog, general purpose timer and other.

Kindly guide

Re: Peripheral not visible in configuration tool

marek-trmac — Thu, 19 Apr 2018 08:48:42 GMT

Hi jtro9

Peripherals is new tool in Config Tools V4 and it is incrementally added for new devices and peripherals. Currently only first subset is supported. Unfortunately CAN and WatchDog are not supported yet.

Regards

Marek

Re: Peripheral not visible in configuration tool

jtro9 — Fri, 20 Apr 2018 03:21:18 GMT

Thanks Marek Trmac for update

I hope all peripherals will come in config tool soon...

Re: Peripheral not visible in configuration tool

paral_jarek — Thu, 17 Jan 2019 01:03:21 GMT

Hi Marek Trmac‌,

is there any official road map for microcontrollers and peripherals which are going to be available in the module Peripherals (in the Config Tools MCUXpresso)?

I actually would like to use FRDM-KL25Z but the module Peripherals missing in the MCUXpresso.

Best regard
Jarek Páral

Re: Peripheral not visible in configuration tool

Lukas_Heczko — Fri, 18 Jan 2019 09:09:11 GMT

Hi Jaroslav,

in the first half of this year we focus on extending MCUXpresso Peripherals tool for LPC processors. We plan to support MCUXpresso Peripherals tool for KL25Z later in Q3 this year.

Hope this information will help you,

Lukas

Re: Peripheral not visible in configuration tool

kurt_staubli — Wed, 04 Sep 2019 13:13:19 GMT

Hi Lukas

What about MCUXpresso Peripherals tool for MIMXRT1062?

Try to implement something similar to NXP's example evkmimxrt1060_adc_etc_hardware_trigger_conv with Peripherals Tool. Struggle with XBAR. Is it because Peripherals Tool is not yet finished?

Kurt

Re: Peripheral not visible in configuration tool

Lukas_Heczko — Thu, 05 Sep 2019 09:10:31 GMT

Hi Kurt,

XBAR is configured by Pins tool.

Specifically for use case from evkmimxrt1060_adc_etc_hardware_trigger_conv example where XBAR is configured to trigger ADC ETC from PIT Channel 0, you can set this in Pins tool following way: in Peripherals Signals tab expand ADC_ETC list and enable XBAR0_TRIG 0. In window with signals that can be routed to the ADC_ETC XBAR trigger 0 pick PIT_TRIGGER0.

Hope this will help,

Lukas

Re: Peripheral not visible in configuration tool

tims123 — Sun, 13 Sep 2020 11:53:19 GMT

Any Update on availbility?

Re: Peripheral not visible in configuration tool

peoplesurv — Sun, 13 Sep 2020 12:32:40 GMT

Click here for people survey guide

Re: Peripheral not visible in configuration tool

docmo99 — Sun, 07 Feb 2021 05:17:09 GMT

Any update for peripherals support in config tools for KL25Z?

Re: Peripheral not visible in configuration tool

Lukas_Heczko — Fri, 19 Feb 2021 14:30:11 GMT

Hi,

currently there are no plans to support KL25Z in Peripherals tool. As an alternative, I suggest to try KL26Z, which is enabled in Peripherals tool. Sorry for inconveniences caused by leaving KL25Z unsupported.

Regards,

Lukas