MCUXpresso Config ToolsのトピックRe: Using MCUXpresso config tool for spifi

Using MCUXpresso config tool for spifi

janoene — Wed, 13 Jan 2021 10:37:09 GMT

Hi all,

Currently, I'm doing experiments with the LPCXpresso54628 Development Board. I'm using SDK version 2.8.2.

The board contains a flash module connected via qspi. If I understand correctly, I should be able to control them with the spifi driver. However, the driver doesn't show up in the configuration view in MCUXpresso. I attached the list I see currently. I'm able to enable the clocks and assign the pins, but I can't enable/configure the peripheral itself.

Any hints about how to use the spifi? (BTW: I found the driver example, so I get an idea how it should work, but I assume that I should be able to add the driver via the configuration tool)

Thanks in advance.

Re: Using MCUXpresso config tool for spifi

ZhangJennie — Thu, 14 Jan 2021 03:23:33 GMT

Hi Janoene

Please see below screenshots of how to add spifi driver.

Have a nice day

Jun Zhang

Re: Using MCUXpresso config tool for spifi

janoene — Thu, 14 Jan 2021 08:23:56 GMT

Dear @ZhangJennie,

Thanks for your answer.

I added the spifi driver like you described. However, it doesn't show up in the configuration tool. How should I configure the driver?

Thanks in advance.

Re: Using MCUXpresso config tool for spifi

ZhangJennie — Fri, 15 Jan 2021 03:53:26 GMT

We can config SPIFI pins in Pins ConfigTool and SPIFI clock in Clock Config Tool. Besides, we can't config others.

Re: Using MCUXpresso config tool for spifi

Petr_H — Wed, 20 Jan 2021 16:35:17 GMT

Hi,

We are sorry, but some drivers are not supported in the Peripherals tool. SPIFI is currently not supported. We are incrementally adding the support, so I have passed your request to the development team to consider the implementation in the next updates.

best regards

Petr Hradsky