Post Build Steps output not showing in CDT Build Console

deniscollis — Wed, 30 Apr 2025 17:39:15 GMT

Here is a transcript from MCUXPresso's CDT Build Console :

Performing post-build steps arm-none-eabi-objcopy -v -I ihex -O binary "X.hex" "X.bin" ; OtaUpdatePackageCreator -p "..\UpdatePackageConfig.txt" copy from `X.hex' [ihex] to `X.bin' [binary] OtaUpdatePackageCreator -p ..\UpdatePackageConfig.txt

Stdout from objcopy is echoed in the build console.

Stdout from OtaUpdatePackageCreator is not.

However, console output is indeed produced when the latter is run in a Windows cmd shell

C:\bldUtils\>OtaUpdatePackageCreator -p UpdatePackageConfig.txt Ver: 11 In: X.bin, capk.bin Out: updPkgV11.bin C:\bldUtils\>

Any insights why this is?

Re: Post Build Steps output not showing in CDT Build Console

mayliu1 — Fri, 09 May 2025 02:48:47 GMT

Hi @deniscollis ,

Thank you so much for your interest in our products and for using our community.

Could you tell me which version of MCUXPresso you are using. And a more detailed description of the problem.

Also, I checked the user guide about your problem , and I think the MCUXpresso_IDE_xx.xx_Command_Line_User_Guide might be helpful.

mayliu1_1-1746758715077.png

Wish it helps you.
If you still have question about it, please kindly let me know.

Wish you a nice day!

Best Regards
MayLiu

MCUXpresso General中的主题 Post Build Steps output not showing in CDT Build Console

Post Build Steps output not showing in CDT Build Console

Re: Post Build Steps output not showing in CDT Build Console