MCUXpresso GeneralのトピックRe: Flash programming & bootloader

Flash programming & bootloader

rans — Sun, 02 Sep 2018 12:33:42 GMT

Hello,

I've downloaded SDK and reviewed documentation, yet I didn't find any mention of flash programming or bootloader.

I understand that it is possible to load application using debugger, but does it mean it also program flash ? If not - what's the solution for flash programming ?

Should we use flashloader tool in SW section of MCU ? (mfgtool )

I read that it download the flasher serially and then starts, but actually we need the flasher to run from flash without any download. Is it possible or described how to do it ?

I've also started also to read manufacture tool documentation, but I am unsure where to find the following files:

7.2.2.5. Program Image to Flash using MfgTool
Here are the steps to program boot image into Flash device
1. Copy the boot_image.sb file, ivt_flashloader_signed.bin and enable_hab.sb to
“<mfgtool_root_dir>/Profiles/MXRT105X/OS Firmware” folder

Thank you,

ranran

Re: Flash programming & bootloader

Alice_Yang — Mon, 03 Sep 2018 10:06:52 GMT

Hello ranran ,

You can use debugger to flash, also can use bootloader.

- You can use MCUXpressso IDE to program , about the detail , please have a look at "MCUXpresso_IDE_User_Guide" -> 11.3.5 Project Flash Programming .

" I understand that it is possible to load application using debugger, but does it mean it also program flash ? "-> Yes.

- About using Flashloader , please have a look at :

https://www.nxp.com/docs/en/nxp/application-notes/AN12238.pdf

Also there are many Application Notes about RT1050 , mybe it can help you when you development :

i.MX RT1050 MCU/Applications Crossover Processor | Arm® Cortex®-M7 @600 MHz, 512KB SRAM |NXP

Hope it helps,

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Flash programming & bootloader

rans — Mon, 03 Sep 2018 20:28:40 GMT

Hi Alice,

Thank very much.

I have additional question please:

we actually need to start the flashloader not by downloading it from serial, but from flash.

Is it possible to start flashloader from flash ? Is it described in AN ?

Thank you,

ranran

Re: Flash programming & bootloader

Alice_Yang — Thu, 06 Sep 2018 05:07:34 GMT

Hello ranran,

It seems the flashloader only can be downloaded into RAM.

Have a great day,
TIC

Re: Flash programming & bootloader

jay_heng — Sat, 15 Jun 2019 04:47:28 GMT

You can try this GUI tool, it is powerful

Releases · JayHeng/NXP-MCUBootUtility · GitHub