MCUXpresso GeneralのトピックRe: Include path not found

Include path not found

chobin — Thu, 07 Oct 2021 14:18:02 GMT

Hallo,

I'm using MCUXpresso IDE v11.0.0.

I have the following warning:
Invalid project path: Include path not found (\Project name\board). Location: pathentry Type: Path Entry Problem.

I checked in Properties->C/C++ General->Paths and symbols->GNU C and I have tthe following situation:

Could you please help me to remove the warning?

Many thaks in advance for you support.

Kinds Regards,

Chobin

Re: Include path not found

ErichStyger — Fri, 08 Oct 2021 07:19:20 GMT

Check the directories listed with the -I option:

Re: Include path not found

chobin — Wed, 13 Oct 2021 14:53:51 GMT

Dear Erich,

thank you for your replay.

I checked the directories listed with the -I option and I found this:

I haven't fond the error.

Do you see it?

Many thanks for your support.

Kind Regards,

Chobin

Re: Include path not found

ErichStyger — Wed, 13 Oct 2021 15:09:29 GMT

You need to use

"${ProjName}/board"

Remove the leading slash.

Erich

Re: Include path not found

chobin — Wed, 13 Oct 2021 15:29:07 GMT

Dear Erich,

I wrote "${ProjName}/board", but the warning appears again.

I'm sorry, but I don't find the mistake.

Chobin

Re: Include path not found

ErichStyger — Wed, 13 Oct 2021 15:32:28 GMT

have you checked the 'Path and Symbols' too?

Re: Include path not found

chobin — Wed, 13 Oct 2021 15:51:54 GMT

In 'Path and Symbols' I have the following:

Chobin

Re: Include path not found

ErichStyger — Wed, 13 Oct 2021 18:05:14 GMT

The ones with the '/' at the beginning are all wrong: remove them.

Re: Include path not found

chobin — Thu, 14 Oct 2021 07:01:08 GMT

I removed the / at the begging of each path, but it doesn't resolve the warning

Re: Include path not found

ErichStyger — Thu, 14 Oct 2021 07:05:45 GMT

sometimes you have to remove the warning manually from the Problems view. Did you already try that?

Re: Include path not found

chobin — Thu, 14 Oct 2021 07:26:38 GMT

I delated it, but the warning appears again.

When I removed the "/" at the beginning of the path, MCUxpresso replaces it with the project name and appears the warning symbol on each path...please lock the following image

If I compile the project, I have errors

Re: Include path not found

ErichStyger — Thu, 14 Oct 2021 08:28:11 GMT

I'm really not sure what is going on.

Desperate try:

Otherwise: can you share your project?

Re: Include path not found

chobin — Thu, 14 Oct 2021 08:42:32 GMT

I've tried it already, but haven't solved it.

The strange thing is that I removed a path from "Path & Symbols" and include sections, but when I compile the software there is a warning that it doesn't find that path...I don't understand why it tries to find that path.

I think I will leave these warnings