MCUXpresso GeneralのトピックRe: New Firmware update flags in LPC82x UART Bootloader

New Firmware update flags in LPC82x UART Bootloader

trongthinh — Wed, 27 May 2020 08:27:07 GMT

Attached file is LPC82x Uart Second bootloader. In file bootloader.c in project bootloader_example, there is a code line

__RODATA(FLASH_INFO2) FW_CHECK_INFO_T boot_chk_info = {BLANK_VALUE_32B, BLANK_VALUE_16B, BLANK_VALUE_16B, BLANK_VALUE_32B};

And in main function

I think the highlighted line is always "FALSE" because boot_chk_info is a constant. Am I right? Please correct me if I am wrong!

ZhangJennie — Thu, 28 May 2020 04:59:43 GMT

NO. this parameter is defined at address 0x00001F80, the default value is blank 0xFFFFFFFF.

if the parameter “new_addr” is blank (i.e 0xFFFFFFFF). Blank value of the “new_addr” indicates the new firmware is not available.

in bootloader and user app, there is routine update_chk_info() which can update this parameter ( at 0x00001F80), thus it is not blank.

Jun Zhang

trongthinh — Wed, 03 Jun 2020 09:46:38 GMT

The FLASH_INFO2 & FLASH_INFO1 is decleared here.