topic Re: [PN7462AU] Is there an API to immediately check if a card(tag) has been removed? in MCUXpresso General

[PN7462AU] Is there an API to immediately check if a card(tag) has been removed?

autoever1leka — Fri, 24 Apr 2020 08:06:59 GMT

Good day,

I'm a engineer using PN7462AU. I am developing an NFC communication program. When I remove the card (tag), I want to recognize it and stop all communication.

Below is the setup details,

1. Hardware: PN7462AU
2. SDK: PN7462AU-FW_v05.21.00
3. IDE: MCUXpresso IDE v11.0.0

Question : Is there an API to immediately check if a card(tag) has been removed?

If anyone knows the answer to your question, please reply.

If you have any question, please feel free to contact me.

Thanks.

Re: [PN7462AU] Is there an API to immediately check if a card(tag) has been removed?

IvanRuiz — Mon, 27 Apr 2020 18:17:43 GMT

Hello,

I believe the following code available in NfcrdlibEx4_MIFAREClassic example of the NFC Reader Library may help you. It is basically an infinite loop checking for card presence (WakeUpA and HaltA commands are sent continuously).

Code (NfcrdlibEx4_MIFAREClassic.c -> starting at line 305):

/* Make sure that example application is not detecting the same card continuously */

{

/* Send WakeUpA */

status = phpalI14443p3a_WakeUpA(pDiscLoop->pPal1443p3aDataParams,

pDiscLoop->sTypeATargetInfo.aTypeA_I3P3[0].aAtqa);

/* Check for Status */

if (status != PH_ERR_SUCCESS)

{

break; /* Card Removed, break from the loop */

}

/* Send HaltA */

status = phpalI14443p3a_HaltA(pDiscLoop->pPal1443p3aDataParams);

CHECK_STATUS(status);

/* Delay - 5 milli seconds*/

status = phhalHw_Wait(pDiscLoop->pHalDataParams, PHHAL_HW_TIME_MILLISECONDS, 5);

CHECK_STATUS(status);

}while(1);

Hope it helps!

BR,

Ivan.

Re: [PN7462AU] Is there an API to immediately check if a card(tag) has been removed?

autoever1leka — Wed, 29 Apr 2020 00:59:56 GMT

Dear Ivan,

Thank you for response my question. I tried the code, but it didn't work. I think it didn't work by my mistake. I will contact you again if you have any further questions. Thank you.