MCUXpresso GeneralのトピックRe: Cannot open MCUXpresso Config tools from V11.1

Cannot open MCUXpresso Config tools from V11.1

tbiberdorf — Tue, 21 Jan 2020 18:57:23 GMT

I just installed MCUXpresso V11.1

I created a new workspace and created a New Project based on the MK60DN512xxx10 controller.

I then select the MCUXpresso Config Tools>>Open Peripherals

and I get the following error message:

It is clearly shown in the Project Explorer window that my project MCU chip is a MK60DN512xxx10

Why can't Config Tools find it?

Thanks

Re: Cannot open MCUXpresso Config tools from V11.1

liborukropec — Tue, 21 Jan 2020 22:43:55 GMT

Hello Terry,

there must be some problem with internet connection, typically it is a (authenticated) proxy that does not cooperate with Eclipse, or intercepts secured connection. This can be analyzed from <ide_workspace>/.metadata/.log file - if you attach it here, I can analyze what is the problem.

In the meantime as a workaround, you can download the ZIP archive with Config Tools data for your processor/board from https://mcuxpresso.nxp.com/en/select_config_tools_data (login required)

This archive can be then imported from File | Import ... :

Regards,

Libor

Re: Cannot open MCUXpresso Config tools from V11.1

tbiberdorf — Tue, 21 Jan 2020 22:50:01 GMT

Hi Libor

Attached is the .log file for analysis

Terry Biberdorf

Sr. Software Engineer

Industrial Business Unit

Littelfuse, Inc.

Tel: +1 605 348 5580 ext 158

Fax: +1 605 348 5685

www.littelfuse.com/industrial<http://www.littelfuse.com/industrial>;

Re: Cannot open MCUXpresso Config tools from V11.1

liborukropec — Wed, 22 Jan 2020 15:24:17 GMT

Hi Terry,

it is because your proxy intercepts the SSL communication and the application correctly refuses tampered communication.

What you can do is to edit c:\nxp\MCUXpressoIDE_11.1.0_3209\ide\mcuxpressoide.ini and add at the end this line (forcing to unsecured http protocol)

-Dcom.nxp.restapi.server=http://mcuxpresso.nxp.com

Regards,

Libor