MCUXpresso GeneralのトピックRe: ftm

ftm

652319403 — Wed, 08 May 2019 08:57:35 GMT

I have some problems in S32K 146

when I used FTM mode,I used FTM3 mode ,but all the FTM clock source are opend ,then I turn off the extra for FTM and use PE to generate code and save it .

The second time I opened the project ,all the FTM clock has been opened again, I don't know why .
I hope that kind people can help me
thank u

Re: ftm

victorjimenez — Tue, 14 May 2019 18:00:58 GMT

Hello,

I wasn't able to reproduce the behavior you mentioned.

What version of the S32DS are you using?

What version of the SDK are you using?

Is this an issue of a single project or all your projects behave like this?

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: ftm

652319403 — Thu, 16 May 2019 02:24:24 GMT

HI.

thanks for you answer.

The version of the SDK is 2.0.0

The version of the S32 DS is S32 Design Studio for Arm® 2018.R1

This is an issue of a single project just in S32 DS

I try to use the SDK for 3.0.0 ,and had met the same question.

Re: ftm

victorjimenez — Fri, 17 May 2019 13:33:28 GMT

Hello,

I was able to reproduce the behavior you mentioned. This is a known issue, it has been already fixed, but with the SDK v3.0.1 release.

Best regards,

Victor.