topic Re: MCUXpresso IDE configuration problem in MCUXpresso General

MCUXpresso IDE configuration problem

d_thiruvonasund — Mon, 25 Feb 2019 09:33:41 GMT

I am using KL25Z micro controller along with FRDM33771BSPIEVB Evaluation board.When I am trying to build my source code (main .c file) in the MCUXpresso IDE platform and I am getting the following message "**** Build of configuration FLASH for project BCCEvaluationSW **** Nothing to build for project BCCEvaluationSW"

Re: MCUXpresso IDE configuration problem

converse — Tue, 26 Feb 2019 08:46:08 GMT

Looks like you have created your own build configuration called "FLASH". I would compare the settings for that build config with one of the standard configs (Debug and Release) and see what is different.

Re: MCUXpresso IDE configuration problem

Alexis_A — Tue, 26 Feb 2019 18:04:23 GMT

Hi Thiruvonasundari,

As I see, I think you're using the MC33771 / MC33772 (Battery Cell Controller) Demo and Driver Library, this library is for Code Warrior 10.6 or higher. I would suggest to download the last Code Warrior version (v11.1).

I hope this helps you.

Best Regards,

Alexis Andalon

Re: MCUXpresso IDE configuration problem

d_thiruvonasund — Mon, 04 Mar 2019 06:42:15 GMT

Ok Con Verse. Thank you.

Re: MCUXpresso IDE configuration problem

d_thiruvonasund — Mon, 04 Mar 2019 06:42:48 GMT

Let me check Alexis. Thank you.

Re: MCUXpresso IDE configuration problem

d_thiruvonasund — Mon, 04 Mar 2019 09:38:22 GMT

Hi Alexis I installed Code Warrior 11.1. I tried with "hello world "example it was building but when I am trying to build my source file nothing happened. When I open Properties-> Tool chain editor it shows

"Orphaned configuration. No base extension cfg exists for org.eclipse.cdt.cross.arm.gnu.sourcery.windows.elf.debug.2136167795".

"Orphaned toolchain org.eclipse.cdt.cross.arm.gnu.sourcery.windows.elf.toolchain.debug.777954515 (ARM Ltd Windows GCC (G++ Lite))".

Thanks

Re: MCUXpresso IDE configuration problem

Alexis_A — Fri, 08 Mar 2019 15:36:41 GMT

Hi Thiruvonasundari,

I'll explain how to import an example to code warrior.

Please click in the next option to import the project to your workspace:

After that, select the folder in which your project is located, the next option will appear in the window, select the project and the option to copy the project in to the workspace:

After this, you would need to make a clean in the project, for this please click in the next option:

After this, if you build your project you shouldn't have any error.

I hope this helps you.

Best Regards,

Alexis Andalon

Re: MCUXpresso IDE configuration problem

d_thiruvonasund — Tue, 09 Apr 2019 03:17:34 GMT

Thanks Alex it works!

Best regards

Sundari