MCUXpresso GeneralのトピックRe: FRDMK64F OpenSDA question

FRDMK64F OpenSDA question

AlbertMann — Mon, 11 Mar 2019 17:30:03 GMT

Hi,

When I connect my PC Host to OpenSDA port of FRDMK64K, I am unable to get any message on my virtual COM port. I have installed the mbed serial port driver and the debug message is OK on the console of MCUXpresso IDE.

Is there any switch to enable the virtual COM port in my PC? According to the NXP document, the message should appear in the terminal.

Thanks,
Albert #FRDMK64K#OpenSDA

Re: FRDMK64F OpenSDA question

Alice_Yang — Wed, 13 Mar 2019 07:06:53 GMT

Hello Albert Mann ,

Please change Semihost to UART refer to below:

Quick Settings->SDK Debug Console -> UART console:

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: FRDMK64F OpenSDA question

AlbertMann — Wed, 13 Mar 2019 15:41:45 GMT

Thank. I am able to get the message at the PC terminal.

On Wednesday, March 13, 2019, 03:07:42 a.m. EDT, Alice_Yang <admin@community.nxp.com> wrote:

#yiv6859497795 * #yiv6859497795 a #yiv6859497795 body {font-family:Helvetica, Arial, sans-serif;}#yiv6859497795 #yiv6859497795 h1, #yiv6859497795 h2, #yiv6859497795 h3, #yiv6859497795 h4, #yiv6859497795 h5, #yiv6859497795 h6, #yiv6859497795 p, #yiv6859497795 hr {}#yiv6859497795 .yiv6859497795button td {}

NXP Community

You have been mentioned

by Alice_Yang in Re: FRDMK64F OpenSDA question in NXP Community - View Alice_Yang's reference to you

Hello Albert Mann ,

Please change Semihost to UART refer to below:

Quick Settings->SDK Debug Console -> UART console:

https://community.nxp.com/servlet/JiveServlet/downloadImage/2-1123984-257613/pastedImage_1.png

Have a great day,

TIC

Re: FRDMK64F OpenSDA question

Alice_Yang — Fri, 15 Mar 2019 03:41:51 GMT

Hi Albert,

Welcome, its my pleasure.

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
-------------------------------------------------------------------------------