MCUXpresso General中的主题 Re: Bluetooth FRDM-KW41Z

Bluetooth FRDM-KW41Z

jalalbeladel — Mon, 10 Jul 2017 12:38:48 GMT

Hello,

I have two transceivers "FRDM KW41Z" coupled by Bluetooth. Just like the video. Now I want to know! where was implemented the stability of the frequency in the C code. Here I mean that the two transceivers communicate on the same frequency.

thanks

Re: Bluetooth FRDM-KW41Z

stephanie_m — Wed, 12 Jul 2017 19:29:04 GMT

Hello,

Could you please tell me what video are you referring to? Which example are you using?

If you download the latest SDK from the MCUXpresso web page, you will find a folder full of documentation of BLE.

Best Regards,

Estephania

Re: Bluetooth FRDM-KW41Z

jalalbeladel — Thu, 13 Jul 2017 08:01:21 GMT

Hello,

thanks for your answer. i mean the BLE+Thread Video: http://www.nxp.com/products/software-and-tools/hardware-development-tools/freedom-development-boards/nxp-freedom-development-kit-for-kinetis-kw41z-31z-21z-mcus:FRDM-KW41Z?tab=In-Depth_Tab

I mean the frequency and the time where the flags jump...

Best regards,

jalal

Re: Bluetooth FRDM-KW41Z

stephanie_m — Wed, 26 Jul 2017 17:30:33 GMT

Hello,

Sorry for the late response, which flags and frequency are you refering to ?

If you take a look at the code you will be able to see that you can chnage the Thread channels in the app_thread_config.h and to perform a channnel change in BLE you can see the ble_controller_task_config.h.

I also recomend you to take a look at the documentation available in the release for more information about the example.

Best Regards,

Estephania

Re: Bluetooth FRDM-KW41Z

jalalbeladel — Fri, 28 Jul 2017 07:27:49 GMT

Hello,

thanks for your answer, i mean the frequency hopping

Best Regards

jalal

Re: Bluetooth FRDM-KW41Z

stephanie_m — Thu, 03 Aug 2017 21:48:01 GMT

Hello,

That is done by the PHY, but you can check and set the channels as I mentioned you before.

Best Regards,

Estephania

Re: Bluetooth FRDM-KW41Z

jalalbeladel — Tue, 08 Aug 2017 13:09:30 GMT

hello,

thanks for your Answer but i have a problem. i'm looking for how the transceiver communicate with each other. I mean the Setting of the frequency. Who can i find it.

Best Regards,

jalal

Re: Bluetooth FRDM-KW41Z

stephanie_m — Wed, 09 Aug 2017 04:26:20 GMT

Hello,

Sorry but I'm not understanding your concern.

The KW41 it's integrated with a 2.4 GHz transceiver supporting Bluetooth®Smart/Bluetooth®Low Energy (BLE) v4.2, Generic FSK, IEEE® 802.15.4 and Thread.

As you might know BLE and Thread have channels to be configured and to communicate, those can be changed in the files I mentioned you before.

What do you need that frequency for ?

Best Regards,

Estephania

Re: Bluetooth FRDM-KW41Z

jalalbeladel — Thu, 17 Aug 2017 07:34:17 GMT

Hello Estephania,

Thanks for your Help! I'm a beginner at nxp ! The transceiver transmits messages on several frequencies. I want to send only to one frequency. How should I adjust this?

I hope you understand what I mean.

thanks

Jalal

Re: Bluetooth FRDM-KW41Z

stephanie_m — Sat, 19 Aug 2017 04:22:40 GMT

Hello,

You can set the frequencies with the channels you choose for Thread.

You can use the channels from the 11 to the 25 in Thread, each channel changes the frequency by adding 0.005

Channel	Frequency (GHz)
11	2.405
12	2.41
13	2.415
14	2.42
15	2.425
16	2.43
17	2.435
18	2.44
19	2.445
20	2.45
21	2.455
22	2.46
23	2.465
24	2.47
25	2.475

Is that what you were trying to change?

Best Regards,

Estephania

Re: Bluetooth FRDM-KW41Z

jalalbeladel — Mon, 21 Aug 2017 07:10:33 GMT

hello,

thanks a lot for your Answer. It was very helpful. Now i want to transmitt a continuous wave.. how can i ajust this at the carrier.

thank you very much

Best Regards

jalal