MBDT for VISIONのトピックRe: s32v234 not recognized as an internal or external command

s32v234 not recognized as an internal or external command

willcampo — Fri, 09 Nov 2018 10:28:53 GMT

Hello everyone, I have already been able to configure the Matlab environment with the NXP.

But at the time I try to load the program "face_detection_camera_main" to the Board, I get the following error.

"C: \\ Users \\ waclab \\ AppData \\ Roaming \\ MathWorks \\ MATLAB" is not recognized as an internal or external command, program or batch file executable.

I have already tried adding the Path (as shown in the image) but in spite of that it does not work.

If you could help me, it would be very useful.

Re: s32v234 not recognized as an internal or external command

Daniel_Popa — Tue, 13 Nov 2018 12:58:44 GMT

Hi willcampo@hotmail.com‌,

Can you paste here the MATLAB console output (all of it) please.

I think we have an issue with some white spaces in the path. In general NXP Vision SDK needs to installed in a path without spaces.

Best regards,

Daniel

Re: s32v234 not recognized as an internal or external command

willcampo — Tue, 13 Nov 2018 14:11:29 GMT

Re: s32v234 not recognized as an internal or external command

Daniel_Popa — Tue, 13 Nov 2018 14:51:27 GMT

Hi willcampo@hotmail.com‌,

I think i know what the problem is.

There are 2 libstdc++-6.dll files on you PC:

the default one is loaded from C:\Windows\SysWOW64\libstdc++-6.dll
the correct one should be loaded from VisionSDK folder

When you install MATLAB this is going to place the libstdc++-6.dll in the “C:\Windows\SysWOW64\” folder and is going to use it as default but this will fail to build the files from the VisionSDK.

For the moment, please go to C:\Windows\SysWOW64\ and rename the libstdc++-6.dll into something else, or delete it.

After that, the build process of all VisionSDK dependencies should be ok.

Please let me know if its working.

Best regards,

Daniel

Re: s32v234 not recognized as an internal or external command

willcampo — Tue, 13 Nov 2018 15:16:35 GMT

The file mentioned can not be found in this folder.

Re: s32v234 not recognized as an internal or external command

Daniel_Popa — Tue, 13 Nov 2018 15:20:03 GMT

Is is possible to be hidden ? Have you configured the explorer to show all files ?

Try a search please. It might be possible to be in another location.

Best regards,

Daniel

Re: s32v234 not recognized as an internal or external command

willcampo — Tue, 13 Nov 2018 16:00:23 GMT

When I searched the system I found these three files.

Which of them should I modify or eliminate?

Re: s32v234 not recognized as an internal or external command

Daniel_Popa — Tue, 13 Nov 2018 16:06:04 GMT

Everything which is not part of the NXP VisionSDK. You should leave unchanged only the first one.

Re: s32v234 not recognized as an internal or external command

willcampo — Tue, 13 Nov 2018 16:39:06 GMT

I have deleted the two files, but the error still continues.

Re: s32v234 not recognized as an internal or external command

Daniel_Popa — Tue, 13 Nov 2018 16:43:55 GMT

paulvlase‌, nxf40536‌,

Any ideas ?

Re: s32v234 not recognized as an internal or external command

paulvlase — Tue, 13 Nov 2018 16:51:40 GMT

Hi willcampo@hotmail.com‌,

Can you show us the output of the following commands run in Matlab command line?

getenv('APU_TOOLS')

getenv('S32V234_SDK_ROOT')

Re: s32v234 not recognized as an internal or external command

willcampo — Tue, 13 Nov 2018 16:55:49 GMT

Re: s32v234 not recognized as an internal or external command

paulvlase — Tue, 13 Nov 2018 17:00:05 GMT

Hi willcampo@hotmail.com‌,

The nbuild system from VSDK expects forward slashes / in the paths from these two environment variables. We'll fix this in the next release.

Can you replace \ with / in APU_TOOLS and S32V234_SDK_ROOT and try again?

Re: s32v234 not recognized as an internal or external command

willcampo — Tue, 13 Nov 2018 17:27:43 GMT

I have made the configuration, but the error persists.

Re: s32v234 not recognized as an internal or external command

paulvlase — Tue, 13 Nov 2018 18:37:35 GMT

Hi willcampo@hotmail.com‌,

Can you show me the content of C:\NXP\APU_Compiler_v1.0\bin folder in explorer, as a screenshot?

Re: s32v234 not recognized as an internal or external command

willcampo — Tue, 13 Nov 2018 22:27:59 GMT

The only thing that is in this folder is this file

Re: s32v234 not recognized as an internal or external command

Daniel_Popa — Wed, 14 Nov 2018 12:45:10 GMT

Hi Willian,

I see 2 main issues with your setup.

First of them: the Vision Toolbox currently available for download supports only VisionSDK 1.1.0

You have installed the VisionSDK 1.2.0 which can't be used in conjuction with the MATLAB toolbox since they are not compatible. There were changes in 1.2.0 which are no longer compatible with 1.1.0 version.

The good news is that on November 19, we are going to release the new version of the Toolbox that will be in sync with 1.2.0 VSDK + HF1 + HF2. Can you wait until next week.

Secondly, the APEX compiler is not installed correctly. You should have more files in that folder.

Best regards,
Daniel

Re: s32v234 not recognized as an internal or external command

willcampo — Wed, 14 Nov 2018 19:19:04 GMT

Maybe you could share version 1.1.0. So I could install this and try again

Re: s32v234 not recognized as an internal or external command

willcampo — Thu, 15 Nov 2018 08:24:28 GMT

Hello again,

I searched for the version VisionSDK_S32V2_RTM_1_1_1, but I could not find it, I only found the version VisionSDK_S32V2xx_RTM_1_0_1_8d46d3.

But when it comes to the installation, I can not install the NP APU_Compiler_v1.0

Re: s32v234 not recognized as an internal or external command

Daniel_Popa — Thu, 15 Nov 2018 09:44:07 GMT

Hi Willian,

I'm sorry for these inconveniences. Unfortunately we (Vision Toolbox Team) do not control the distribution of VSDK nor APU Compiler. We are just a consumer of their deliveries.

The link for VSDK 1.1.1 is this one: https://nxp.flexnetoperations.com/control/frse/download?element=10088717

Please log in into your NXP account then then paste this address into the browser address bar.

If you are not entitled to see the page, an automatic dialogue report windows will appear that will redirect your query to the technical support. Just comment there that you wish to get access to the VSDK1.1.1 and paste the link below.

Someone from technical support will allocate into your account the VSDK1.1.1 product.

Hope this will help!

Daniel