MBDT for RADAR中的主题 SPT 3.1 Example Error

SPT 3.1 Example Error

rspark5263 — Thu, 03 Feb 2022 06:52:00 GMT

Hi,

I try to run SPT Tool box for Matlab simulation of SPT3.1

however, when I run the function 'switch_spt(31)', I've got an error msg.

>> Error code is -5, and error message is: No such feature exists.

but switch_spt(28) runs normally.

>> switch_spt(28)

The current SPT version is 2.8, and the simulator version is 3.0.0.

Please let me know how to run spt31 in spt toolbox

Re: SPT 3.1 Example Error

iulianbulancea — Wed, 23 Feb 2022 13:40:26 GMT

Hello,

You have this error because you do not have license to use SPT 3x. Please add an official request ticket to obtain it.

Thank you,

Iulian Bulancea

Re: SPT 3.1 Example Error

ziranwu — Thu, 19 May 2022 23:49:51 GMT

Hi Lulian,

I want to get licensed for SPT 3.x too in the Matlab Radar Toolbox. How should I add an official request ticket to it?

Thanks,

@iulianbulancea

@rspark5263

Ziran

Re: SPT 3.1 Example Error

iulianbulancea — Tue, 24 May 2022 11:47:27 GMT

Hello @ziranwu ,

You should open a support ticket on nxp.com in which you should add your company details and mention that you need a MBDT SPT toolbox which is a product of NXP. In case you want a MATLAB RADAR toolbox you should contact the MathWorks, this toolbox is a MathWorks product.

Thank you,

Iulian

Re: SPT 3.1 Example Error

Maysonet — Fri, 15 Sep 2023 08:33:02 GMT

The error message you're encountering, "Error code -5: No such feature exists," suggests that the function ' switchspt(31) ' is trying to access a feature or version (SPT 3.1) that is not available or recognized by your SPT Toolbox. The toolbox currently supports SPT version 2.8 and simulator version 3.0.0. To run 'spt31' in the SPT Toolbox, you may need to update the toolbox to a version that supports SPT 3.1, or check if there are additional configurations or updates available for compatibility. 'switch_spt(28)' works because it's compatible with your current setup.