topic Re: Question on freeMASTER in MBDT DIY projects

Question on freeMASTER

vpandey1 — Sat, 13 Jun 2020 06:50:17 GMT

Hi there

I'm new to using freeMASTER & would appreciate if someone can help with following

1. How to use a command line to issue START command to freeMASTER to start with logging. For our test application running NI labview, command needs to be issued to freeMASTER to start the data logging. The unit under test is connected to PC through USB port and at power up embedded code will start with internal checks on unit & start outputting messages on USB com port. The power up is done using labview code.

2. Once data is logged need to save logged data to excel file. Please help on how to save data to excel file.

Thanks

Vinod

Re: Question on freeMASTER

mariuslucianand — Mon, 29 Jun 2020 07:20:43 GMT

Hello vpandey@dynamiccontrols.com‌,

I think for your question you will find a proper answer on the FreeMASTER community space.

Hope this helps,

Marius

Re: Question on freeMASTER

kadanik — Sat, 02 Dec 2023 09:03:05 GMT

Have you meant this link?

https://community.nxp.com/t5/FreeMASTER/bd-p/freemaster