topic .pmpx file in Model-Based Design Toolbox (MBDT)

.pmpx file

paul_ephraim_13 — Fri, 06 Sep 2024 08:52:50 GMT

Kindly elaborate on the genreration of the .pmpx file for a simulink model for real time data analysis.

Re: .pmpx file

agus_idiada — Tue, 10 Sep 2024 08:30:49 GMT

Hello Paul, may be I can help you, the file pmpx is the extension file of a freemaster project that has the information of the configuration you already did in freemaster. As far as I understand, you can not upload it into a simulink model. Freemaster is to watch variables of the DSP with a deployed code. Hope it helps.

Re: .pmpx file

Irina_Costachescu — Thu, 12 Sep 2024 11:16:36 GMT

Hi @paul_ephraim_13

For creating a .pmpx file to watch the evolution of your variables inside FreeMASTER, please check Chapter 6 FreeMASTER PC application of the following article https://community.nxp.com/t5/NXP-Model-Based-Design-Tools/Sending-data-via-UART-and-monitoring-signals-with-FreeMASTER/ta-p/1747896.

As I also see this article referenced in the image you have attached to the thread, could you please share with us if you encountered any issues in following the steps described in there?

Thank you,

Irina