topic Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther) in Model-Based Design Toolbox (MBDT)

HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

Daniel_Popa — Mon, 22 May 2017 09:03:08 GMT

HotFix_1: Missing lsp.h file

Problem: Model compilation terminates with the following error:

SWLIBS_Defines.h:132:17: fatal error: lsp.h: No such file or directory
#include <lsp.h>

Root Cause: S32DS for PA version 1.1 Build id: 170203 does not contain the file in the compiler toolchain

Workaround: Save the file attached lsp.h in

{S32DS for PA installation folder}S32_Power_v1.1\S32DS\e200_ewl2\EWL_C\include\pa\ folder

Original Attachment has been moved to: lsp.h.zip

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

Daniel_Popa — Mon, 19 Jun 2017 13:00:47 GMT

HotFix_2: Fix license errors for DISK_SERIAL_NUM with less than 8 characters

NXP Tracking number: AST-619

Problem: If your HDD has a serial number with less than 8 characters, the license checking and validation will fail even if the license is correctly generated

Root Cause: Coding logic error

Workaround: Update the file attached in the following folder

{Toolbox install dir}\mbdtbx_pnt\mbdtbx_pnt\mscripts\matlab_ui\ folder mbd_pnt_hostid.p file

Customer Report: Undefined function or variable 'lic_err'.

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

constantinrazva — Wed, 21 Jun 2017 11:05:26 GMT

HotFix_3: Add support for the latest e200 compiler that is released with S32 Design Studio for Power v1.2 .

NXP Tracking number: AST-603

Problem: MDBT_MPC57xxP did not work with the latest e200 compiler

Root Cause: Linker files were updated in the latest S32 Design Studio's release.

Workaround: Update the files attached in the following folder :

{Toolbox install dir}\mbdtbx_pnt\src\s32ds_specific_files\ folder MPC5744P_FLASH.ld file

{Toolbox install dir}\mbdtbx_pnt\src\s32ds_specific_files\ folder MPC5744P_RAM.ld file

{Toolbox install dir}\mbdtbx_pnt\src\s32ds_specific_files\ folder MPC5744P_RAM_BAM.ld file

{Toolbox install dir}\mbdtbx_pnt\src\s32ds_specific_files\ folder MPC5743P_FLASH.ld file

{Toolbox install dir}\mbdtbx_pnt\src\s32ds_specific_files\ folder MPC5743P_RAM.ld file

{Toolbox install dir}\mbdtbx_pnt\src\s32ds_specific_files\ folder MPC5743P_RAM_BAM.ld file

{Toolbox install dir}\mbdtbx_pnt\src\s32ds_specific_files\ folder MPC5742P_FLASH.ld file

{Toolbox install dir}\mbdtbx_pnt\src\s32ds_specific_files\ folder MPC5742P_RAM.ld file

{Toolbox install dir}\mbdtbx_pnt\src\s32ds_specific_files\ folder MPC5742P_RAM_BAM.ld file

{Toolbox install dir}\mbdtbx_pnt\src\s32ds_specific_files\ folder initialize_gpr.s file

The linker files were updated as described in "GNU Tools for e200 processors" release notes - "3.1 Update linker script" to migrate to version 1.2.

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

Daniel_Popa — Tue, 18 Jul 2017 18:34:49 GMT

HotFix_4: Add support for exporting generated code as project for S32 Design Studio for Power v1.2 .

NXP Tracking number: AST-300

Request: MDBT_MPC57xxP should enable S32DS project creation from the Simulink generated code

Update Patch: Update the files attached in the following folders (make a back-up copy of the original files before you begin):

#1: Copy & replace mbd_pnt_make_rtw.m file into {Toolbox install dir}\mbdtbx_MPC574xP\mbdtbx_pnt\mbdtbx_pnt\ folder

#2: Copy & replace mbd_pnt.tcl file into {Toolbox install dir}\mbdtbx_MPC574xP\mbdtbx_pnt\mbdtbx_pnt\ folder

#3: Copy mbd_pnt_ds.p file into {Toolbox install dir}\mbdtbx_MPC574xP\mbdtbx_pnt\mbdtbx_pnt\mscripts\utils\ folder

Open Matlab/Simulink and within the MBD_MPC574xP_Config block you should now see "Generate S32 Design Studio ProjectInfo.xml file" option:

Build the Simulink model to obtain the ProjectInfo.xml file needed to import the automatic generated code into S32 Design Studio for Power v1.2.

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

jfrey — Mon, 24 Jul 2017 14:15:27 GMT

Without having two separate MBDT installs is it possible to use both v1.1 and v1.2 on the same machine?

Also the NXP Tracking Number appears to be on an internal NXP server. The DNS name does not resolve.

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

Daniel_Popa — Tue, 25 Jul 2017 07:09:30 GMT

Hi jfrey‌,

My recommendation is to have both MBDT install versions on your PC and to switch between them from Matlab Path (Add/Remove). We have not tested them together within a single Matlab instance and since some of the callback functions are the same - you might end up with various issues if both revisions are active in the same Matlab.

Regarding the tracking numbers - you are correct, they are not visible to the external customers (...yet). Still that is a backup for us - to be used for the next releases of MPC5744 to make sure we have not missed any patch.

Best regards,
Daniel

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

jfrey — Tue, 25 Jul 2017 07:11:27 GMT

Regarding the tracking numbers - you are correct, they are not visible to the external customers (...yet).

I hear GitHub is an excellent place to store source code and do issues tracking.

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

markusransberge — Wed, 30 Aug 2017 11:55:22 GMT

HotFix_5: Correct code generation file for missing/wrong eTimer_0 priorities.

NXP Tracking number: AST-780

Problem: The line for channel 5 is missing in the generated "intc_init.c" file. This also causes that the ISR priority of eTimer_0 channel 4 gets wrongly set.

Root Cause: mbdtargetmainlibpnt.tlc is missing one line of code for the eTimer_0 channel 5 priority.

Workaround: Update the file attached in the following folder (make a back-up copy of the original file before you begin):

Copy & replace mbdtargetmainlibpnt.tlc file into {Toolbox install dir}\mbdtbx_MPC574xP\mbdtbx_pnt\mbdtbx_pnt\

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

constantinrazva — Mon, 23 Oct 2017 13:41:48 GMT

HotFix_6: DMA config block - address and channel issue

NXP Tracking number: AST-830

Problem: DMA config block - address input not working for all hex numbers and some DMA channels are not usable.

Root Cause: Coding logic error.

Workaround: Update the files attached in the following folders:

{Toolbox install dir}\mbdtbx_pnt\mbdtbx_pnt\mbdtargetmainlibpnt.tlc

{Toolbox install dir}\mbdtbx_pnt\mbdtbx_pnt\mbd_pnt_ec_toolbox.slx

{Toolbox install dir}\mbdtbx_pnt\mbdtbx_pnt\mscripts\dma\mbd_pnt_dma_config_ch_num.p

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

mariuslucianand — Fri, 19 Jan 2018 10:30:15 GMT

HotFix_7: CAN Recevier issue

NXP Tracking number: AST-908

Problem: CAN Receiver issue, it works only when one block is used. When is used another block, many of the can messages will be ignored.

Root Cause: Coding logic error.

Workaround: Update the files attached in the following folders:

{Toolbox install dir}\mbdtbx_pnt\src\mbdtbx_pnt\src\c_library folder flexcan_pnt_library.c file

{Toolbox install dir}\mbdtbx_pnt\mbdtbx_pnt\blocks\can folder can_pnt_receive_data_trigger.tlc file

Customer Report: CAN Recevier issue

Special thanks to 剑明肖‌for testing and fix confirmation.

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

adrienpol — Fri, 09 Feb 2018 16:41:40 GMT

Hello,

I found an other problem on this "flexcan_pnt_library.c". The CAN Bus 1 was not working on my board due to a wrong imsr declaration in the library :

Was :
/*FlexCAN_1 : mscr |mscr_value | imsr | imscr_value*/
static can_pinMux pinMux_1_TxD[] = { { 14, 0x32810001, 0, 0 } };
static can_pinMux pinMux_1_RxD[] = { { 15, 0x30080000, 32, 0x00000001 },
{ 17, 0x30080000, 32, 0x00000002 } };

Sould be :

/*FlexCAN_1 : mscr |mscr_value | imsr | imscr_value*/
static can_pinMux pinMux_1_TxD[] = { { 14, 0x32810001, 0, 0 } };
static can_pinMux pinMux_1_RxD[] = { { 15, 0x30080000, 33, 0x00000001 },
{ 17, 0x30080000, 33, 0x00000002 } };

If you can confirm it :smileywink:

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

adrienpol — Wed, 21 Feb 2018 10:31:05 GMT

HotFix_8: CAN Bus 1 And CAN Receive Data Trigger block

NXP Tracking number: ???

Problem:

CAN Bus 1 was not working, (none Rx or Tx).
The block "CAN Receive Data Trigger" was not working with CAN Bus 1 and 2. (=> Crash )

Root Cause:

Wrong pin declaration for the CAN Bus 1
Interrupt from trigger block was not clear for CAN Bus 1 and 2.

Workaround: Update the files attached in the following folders: (Files are based on the HotFix_7)

{Toolbox install dir}\mbdtbx_pnt\src\mbdtbx_pnt\src\c_library folder flexcan_pnt_library.c file

{Toolbox install dir}\mbdtbx_pnt\mbdtbx_pnt\blocks\can folder can_pnt_receive_data_trigger.tlc file

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

Daniel_Popa — Wed, 21 Feb 2018 14:35:44 GMT

Thank you Adrien for helping with this.

mariuslucianandrei‌, can you please add the Jira number and integrate this fix in our database.

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

mariuslucianand — Thu, 29 Mar 2018 16:36:43 GMT

Hello,

Thank you adrienpol‌ for your fix.

I have integrated the fix in our database. The NXP tracking number is AST-962.

Marius

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

jjacp — Wed, 18 Apr 2018 15:49:24 GMT

Hi constantinrazvan.chivu,

Is this patch necessary for the latest version of S32, v2017R1?

Thanks!

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

constantinrazva — Thu, 19 Apr 2018 12:14:35 GMT

Hello jjacp‌,

Yes, you should install this patch also for version 2017R1.

Kind regards,

Razvan.

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

constantinrazva — Wed, 25 Apr 2018 15:13:14 GMT

HotFix_9: Fix "Undefined function 'slsfnagctlr'..." when trying to generate code on R2016b/R2017a

Problem: If you try to generate code for any model on R2016b/R2017a, you will receive this error: "Undefined function 'slsfnagctlr' for input arguments of type 'char'."

Root Cause: Matlab API change.

Workaround: Download slsfnagctlr.p in the following folder

{Toolbox install dir}\mbdtbx_pnt\mbdtbx_pnt\mscripts

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

hongfeifei — Tue, 05 Jun 2018 00:18:37 GMT

thank you very much, help me solve this problem which undefined function or variable 'lic_err'

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

janexzj — Fri, 07 Dec 2018 15:00:37 GMT

Hello,@dumitru-daniel.popa

I found a problem using MBD Toolbox along with S-Function Builder. I could run or bulid the model which contained the block created by S-function builder without the block from MBD Toolbox. But if I put the the block created by S-function builder and the block from MBD Toolbox together and build the model again, there would be an error like the picture below. 'crctry_wrapper.c' was created by S-function builder.

I tried again using Legacy Code Tool to build a same block. I could also run or build the model which contained the block created by S-function builder without the block from MBD Toolbox. But there was a similar problem when I built the model containing the block created by S-function builder and the blocks from MBD Toolbox. 'CRC.c' was the c code used by Legacy Code Tool.

Is there any way to solve the problem?

Re: HotFix: MBD Toolbox rev2.0.0 for MPC5744P (Panther)

zongchen — Wed, 09 Jan 2019 09:05:44 GMT

Hello Daniel, When I was trying to generate code with matlab2017a, a message box came out. As no Evaluation Board was connected, then I press OK, another message box came out as below.

Do you know how to solve this problem? Thanks in advance.