https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/MPC5744P-MPU-Application-Integration/m-p/1801443#M8825 <P>I am trying to integrate CMPU with my application in Simulink, but I am facing a problem. The inputs and outputs of every subsystem or referenced model (i.e., application component) take addresses lying outside the region assigned to this component. To make it more clear, let's assume I am giving a TID M to component X and a TID N to component Y. All the inputs and outputs of components X and Y take random addresses regardless of the task IDs assigned to them, so when I enter component X, I don't have access to both its inputs and outputs.</P> Sun, 04 Feb 2024 15:23:20 GMT Mennazz 2024-02-04T15:23:20Z https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/MPC5744P-MPU-Application-Integration/m-p/1801443#M8825 <P>I am trying to integrate CMPU with my application in Simulink, but I am facing a problem. The inputs and outputs of every subsystem or referenced model (i.e., application component) take addresses lying outside the region assigned to this component. To make it more clear, let's assume I am giving a TID M to component X and a TID N to component Y. All the inputs and outputs of components X and Y take random addresses regardless of the task IDs assigned to them, so when I enter component X, I don't have access to both its inputs and outputs.</P> Sun, 04 Feb 2024 15:23:20 GMT https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/MPC5744P-MPU-Application-Integration/m-p/1801443#M8825 Mennazz 2024-02-04T15:23:20Z