Model-Based Design Toolbox (MBDT)のトピックRGBLED mismatch

RGBLED mismatch

RegulusCheng — Mon, 15 Jan 2024 09:36:21 GMT

lHi，

I am using S32K3X4EVB-Q172 board with Simulink in Matlab 2021b.

MBDT Version 1.4.0

I try to use the Dio Example, in whitch the Red LED will flah and the Bule LED will open when push user buttom.

I have successfully download the program. however, I found that the RGBLED never shine, instead, the Reset LED behaves as what RGBLED should behave: it flashed and keep open when I push user buttom.

I have change the hardware to S32K344-Q172 in Model Configuration.

Please help me if you have suggestion.

Re: RGBLED mismatch

georgevictor — Mon, 15 Jan 2024 10:13:26 GMT

Hi, @RegulusCheng,

Thank you for using MBDT on your projects.

It looks like your evaluation board enters into a sequential reset state. Please review the following thread S32K3X4EVB-T172 with MBD which addresses the same issue.

Best regards,

Victor

Re: RGBLED mismatch

RegulusCheng — Tue, 16 Jan 2024 09:55:19 GMT

Thank you, Victor

I change the Jumper31 as you said in that thread, and the board runs as wish.

I noticed that the reason of this problem is not found, if you found the final solution, please let me know