topic NXP Simulink library for MPC5777C and MPC5777E in Model-Based Design Toolbox (MBDT)

NXP Simulink library for MPC5777C and MPC5777E

TLin3 — Tue, 21 Mar 2023 16:28:17 GMT

Hi
When selecting MCU MPC5777C or MPC5777E some blocks show the following error "The selected MCU has no support in MBDT for this peripheral".

https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/NXP-Simulink-library-for-MPC5777C/m-p/1035078

People have the same issue before

MBDT for MPC57xx version 3.2.0 is already installed.

Still appear to have some error.

Could you look into this issue, please?

Thanks

Re: NXP Simulink library for MPC5777C and MPC5777E

petervlna — Wed, 22 Mar 2023 08:24:01 GMT

Hello,

I am redirecting your thread to MDBT community.

MDBT team answer only via that community, so you will get most accurate help there.

Best regards,

Peter

Re: NXP Simulink library for MPC5777C and MPC5777E

TLin3 — Wed, 22 Mar 2023 10:17:28 GMT

Hi Peter @petervlna

Thanks, and hopefully I will get support from NXP team soon.

Re: NXP Simulink library for MPC5777C and MPC5777E

stefancinipeanu — Thu, 23 Mar 2023 10:20:19 GMT

Hello, @TLin3

NXP`s MBD Toolbox for MPC57xx platform reunites 2 major MPC MCU families: MPC574x and MPC577x. As far as I can see in your attached pictures, you are trying to use ADC and PWM peripherals.

Notice that MPC574x family has the ADC and FlexPWM peripherals, while the MPC577x family uses the EQADC peripheral for A/D conversions and eMIOS peripheral for PWM signals generation. You can check out the reference manuals for both MCUs for more information.

Hope this helps!

Regards,

Stefan.