topic In Simulink can't choose NXP cotex-M7 in Model-Based Design Toolbox (MBDT)

In Simulink can't choose NXP cotex-M7

dingjie — Wed, 02 Nov 2022 07:53:01 GMT

In simulink,when choose NXP,there are only cortex-m0,m3,m4,and do not have m7.

And the simulink version is the latest:MATLAB Version: 9.13.0.2049777 (R2022b).

Please help,Thanks!

Re: In Simulink can't choose NXP cotex-M7

mariuslucianand — Mon, 07 Nov 2022 08:22:32 GMT

Hello @dingjie ,

The options displayed in the view from your screenshot are most like handled by the embedded coder.

If you want to generate code for NXP processors Cortex M7 Based, please check the availability of your target through one of the below pages of NXP's Model-Based Design Toolbox targeting Cortex M7-based microcontrollers.

In other words, please install one of our toolboxes to generate code for our Cortex M7 MCUs.

S32K3xx- How To

i.MX RT - How To

Regards,

Marius

Re: In Simulink can't choose NXP cotex-M7

dingjie — Wed, 09 Nov 2022 12:14:18 GMT

My problem has been solved by the method you mentioned,thank you!