Model-Based Design Toolbox (MBDT)のトピックPMSM_ClosedLoop, the example model of MBDT toolbox based on S32K1xx series, cannot make the motor ru https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/PMSM-ClosedLoop-the-example-model-of-MBDT-toolbox-based-on/m-p/1466313#M7369 <P>Hello, I have encountered a problem. PMSM_ClosedLoop, the example model of MBDT toolbox based on S32K1xx series, cannot make the motor run. When I independently controlled the current loop for simulation in Matlab/Simulink, I found that three-phase sinusoidal waveform could not appear. I do not know what causes this, I hope you can help me answer, thank you!</P> Mon, 30 May 2022 14:03:05 GMT fff 2022-05-30T14:03:05Z PMSM_ClosedLoop, the example model of MBDT toolbox based on S32K1xx series, cannot make the motor ru https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/PMSM-ClosedLoop-the-example-model-of-MBDT-toolbox-based-on/m-p/1466313#M7369 <P>Hello, I have encountered a problem. PMSM_ClosedLoop, the example model of MBDT toolbox based on S32K1xx series, cannot make the motor run. When I independently controlled the current loop for simulation in Matlab/Simulink, I found that three-phase sinusoidal waveform could not appear. I do not know what causes this, I hope you can help me answer, thank you!</P> Mon, 30 May 2022 14:03:05 GMT https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/PMSM-ClosedLoop-the-example-model-of-MBDT-toolbox-based-on/m-p/1466313#M7369 fff 2022-05-30T14:03:05Z