https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/S32K-Online-Calibration-INCA/m-p/1441655#M7156 <P>Hello,</P><P>We've run into limitations with Freemaster (communication errors due to size and speed of the application).</P><P>As a result, we'd like to move over to the industry standard for engine calibration, INCA.</P><P>On the ETAS website they offer ETK-Support for the S32K.</P><P><A href="https://www.etas.com/en/products/etk_fetk_xetk_ecu_interfaces-supported_microcontrollers.php" target="_blank">https://www.etas.com/en/products/etk_fetk_xetk_ecu_interfaces-supported_microcontrollers.php</A></P><P>Is the S32K capable of supporting the "Working Page / Reference Page" in INCA (and online calibration on the Working Page".</P><P>We believe so, as there's an "External Mode" example in MBDT where a constant can be changed live.</P><P>How does it work with the S32K?</P><P>Is it linked to this issue below?</P><P><A href="https://community.nxp.com/t5/S32K/S32K144-How-to-remap-Flash-address-to-Ram/td-p/945566" target="_blank">https://community.nxp.com/t5/S32K/S32K144-How-to-remap-Flash-address-to-Ram/td-p/945566</A></P><P>&nbsp;</P><P>Thanks.</P><P>&nbsp;</P> Sun, 10 Apr 2022 13:19:40 GMT Sam_ECU 2022-04-10T13:19:40Z https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/S32K-Online-Calibration-INCA/m-p/1441655#M7156 <P>Hello,</P><P>We've run into limitations with Freemaster (communication errors due to size and speed of the application).</P><P>As a result, we'd like to move over to the industry standard for engine calibration, INCA.</P><P>On the ETAS website they offer ETK-Support for the S32K.</P><P><A href="https://www.etas.com/en/products/etk_fetk_xetk_ecu_interfaces-supported_microcontrollers.php" target="_blank">https://www.etas.com/en/products/etk_fetk_xetk_ecu_interfaces-supported_microcontrollers.php</A></P><P>Is the S32K capable of supporting the "Working Page / Reference Page" in INCA (and online calibration on the Working Page".</P><P>We believe so, as there's an "External Mode" example in MBDT where a constant can be changed live.</P><P>How does it work with the S32K?</P><P>Is it linked to this issue below?</P><P><A href="https://community.nxp.com/t5/S32K/S32K144-How-to-remap-Flash-address-to-Ram/td-p/945566" target="_blank">https://community.nxp.com/t5/S32K/S32K144-How-to-remap-Flash-address-to-Ram/td-p/945566</A></P><P>&nbsp;</P><P>Thanks.</P><P>&nbsp;</P> Sun, 10 Apr 2022 13:19:40 GMT https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/S32K-Online-Calibration-INCA/m-p/1441655#M7156 Sam_ECU 2022-04-10T13:19:40Z