topic Re: Which MATLAB products were used for support MBDToolbox_S32K1xx? in Model-Based Design Toolbox (MBDT)

Which MATLAB products were used for support MBDToolbox_S32K1xx?

weibing_liao — Mon, 23 Aug 2021 06:22:35 GMT

MATLAB has so many products, like:

MATLAB
Simulink
MATLAB Coder
MATLAB Compiler
MATLAB Compiler SDK
MATLAB Report Generator
Simulink Check
Simulink Code Inspector
Simulink Coder
Simulink Compiler
Simulink Control Design
Simulink Coverage
Simulink Design Optimization
Simulink Design Verifier
Simulink Desktop Real-Time
Simulink PLC Coder
Simulink Real-Time
Simulink Report Generator
Simulink Requirements
Simulink Test
Stateflow
Statistics and Machine Learning Toolbox
Vehicle Dynamics Blockset
Vehicle Network Toolbox
Vision HDL Toolbox
......

Which MATLAB products were used for support MBDToolbox_S32K1xx?

Re: Which MATLAB products were used for support MBDToolbox_S32K1xx?

mariuslucianand — Mon, 23 Aug 2021 10:13:13 GMT

Model-Based Design Toolbox for S323K1xx requires to have both MATLAB and Simulink and the following additional Toolboxes MATLAB Coder, Simulink Coder, and Embedded Coder. Without any of these, the code generation process will not work.

My suggestion is also to get the Stateflow toolbox because many of our models use some states transitions, and also might help you in your application.

Hope this helps,
Marius

Re: Which MATLAB products were used for support MBDToolbox_S32K1xx?

weibing_liao — Tue, 24 Aug 2021 01:16:49 GMT

The following additional Toolboxes MATLAB Coder, Simulink Coder, and Embedded Coder ,Should we just have one or all of them?

Re: Which MATLAB products were used for support MBDToolbox_S32K1xx?

Ahmed_BN — Tue, 01 Mar 2022 08:29:01 GMT

Hello @mariuslucianand ,

Sorry to ask again part of the question I have asked here, and to add a need for the dual motor kit.

I have a general question about the MathWorks code generator. We want to acquire small kits for BLDC control to develop RCP systems under the MathWorks environment :
- MCSPTE1AK144 with S32K144
and
- MTRCKTDBN5643L with MPC5643L

And we ask if we just need :

( Matlab + Simulink + Stateflow ) + Embedded Coder ?

or do we need "Matlab Coder" and "Simulink Coder" in addition to Embedded Coder ? in other words :

( Matlab + Simulink + Stateflow ) + Embedded Coder + Matlab Coder + Simulink Coder ?

- Concerning the dual motor kit MTRCKTDBN5643L, I don't find explicitly a compatibility with the MBDT toolbox of NPX ? or maybe you have already provided links that explain this compatibility ?

Sincerely