Model-Based Design Toolbox (MBDT)のトピックExport s12zvm MBDT generated code to codewarrior

Export s12zvm MBDT generated code to codewarrior

AjRj14 — Tue, 16 Nov 2021 06:25:21 GMT

Hi,

I am new to MBD are. Please help me with below query.

Is it possible to export the S12ZVM MBDT generated code to Codewarrior for MCUs (Eclipse IDE) version 11.1 (SPECIAL EDITION) and then Compile, build and debug on board.

I am planning to start MBD with BLDC_ClosedLoop_S12ZVM and PMSM_ClosedLoop_Sensorless_S12ZVM example

Re: Export s12zvm MBDT generated code to codewarrior

mariuslucianand — Tue, 16 Nov 2021 10:05:42 GMT

Hello @AjRj14 ,

You can import the generated elf file for debugging by following the below procedure:

https://community.nxp.com/t5/CodeWarrior-Development-Tools/Is-there-a-way-to-import-an-ELF-file-into-the-cw-10-IDE-to-debug/m-p/334302

Unfortunately, the toolbox does not provide a way to directly import the generated code under CodeWarrior IDE. But what you can do is to start from a blanc project and to integrate pieces of the generated code.

Hope this helps,

Marius

Re: Export s12zvm MBDT generated code to codewarrior

Henry87 — Wed, 24 Nov 2021 11:33:34 GMT

Hello,

Everything is very open with a clear description of the issues. It was truly informative. Your link is very helpful. Many thanks for sharing!