topic Re: MCAN_Receive mode error on RDVCU5775EVM development board in Model-Based Design Toolbox (MBDT)

MCAN_Receive mode error on RDVCU5775EVM development board

peaces — Sat, 11 Sep 2021 06:34:48 GMT

Hello to everyone
I want to use MCAN_Receive block in "Blocking" mode on the RDVCU5775EVM development board, but I get the error in the picture.
Can you help with this?

Re: MCAN_Receive mode error on RDVCU5775EVM development board

mariuslucianand — Wed, 15 Sep 2021 07:52:25 GMT

Hello @peaces ,

Can you please have a look at this page?

https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/Build-Fails-When-Target-MCU-gt-Family-is-set-to-MPC5775B-in/m-p/1186127#M5371

Hope this helps,

Marius

Re: MCAN_Receive mode error on RDVCU5775EVM development board

peaces — Wed, 15 Sep 2021 09:05:20 GMT

Hello @mariuslucianand

I have reviewed the page before and asked this question because I did not get any results.

Re: MCAN_Receive mode error on RDVCU5775EVM development board

peaces — Fri, 17 Sep 2021 11:25:17 GMT

do you have any results?

Re: MCAN_Receive mode error on RDVCU5775EVM development board

ahmetsaglam — Wed, 10 Nov 2021 07:50:24 GMT

HI @mariuslucianand

When we use the MCAN receive block, we encounter the error in the picture.

''''''Error: Simulink Coder Error: The specified port index 'Number' of <S2>/MCAN_Receive should be a number between 0 and 3.'''''

We applied the fields on this page

https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/Build-Fails-When-Target-MCU-gt-Family-i...

Regards

Ahmet