topic Re: Debugging Generated code on NXP S32DS ver 1.3 in Model-Based Design Toolbox (MBDT)

Debugging Generated code on NXP S32DS ver 1.3

viet — Wed, 08 Sep 2021 07:19:04 GMT

my model is design on S32k118

i have following the tutorial to import the generated code to S32 DS version 1.3

Can compile the code on S32 DS, but there is no option to change to S32k118 target in the debug configuration ==> i am not able to debug the generated code on S32k118 development kit.

my generated code is attached.

Re: Debugging Generated code on NXP S32DS ver 1.3

mariuslucianand — Wed, 08 Sep 2021 08:06:50 GMT

Hello @viet.

Can you please update the S32DS to the S32DS for ARM 2.2?

S32 Design Studio for ARM 2.2 – Windows/Linux

Also, can you please install as well the RTM update 3.0.3?

S32 Design Studio for ARM 2.2 Update 1 S32 SDK for S32K1xx SR RTM 3.0.3

Hope this helps,

Marius

Re: Debugging Generated code on NXP S32DS ver 1.3

joshua_hong — Wed, 08 Sep 2021 08:59:09 GMT

Hi @mariuslucianand

do you mean using the S32DS for ARM 2.2 and follow the steps outline by Daniel in this link?

https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-export-Generated-Code-to-S32-Design-Studio-IDE-applicable/m-p/675059

Re: Debugging Generated code on NXP S32DS ver 1.3

viet — Thu, 09 Sep 2021 05:16:35 GMT

Hi @mariuslucianand

i tried with version S32DS version 2.2 but i am not able to compile the code, so not change to check the debug configuration.

Could you please show me how to install please install as well the RTM update 3.0.3, i think this is the last hope.

thanks
Viet

Re: Debugging Generated code on NXP S32DS ver 1.3

mariuslucianand — Wed, 15 Sep 2021 06:42:36 GMT

Hello @viet

Please download the archive from the following link:

S32 Design Studio for ARM 2.2 Update 1 S32 SDK for S32K1xx SR RTM 3.0.3

Once you have the archive, please go to S32DS for ARM 2.2. Go to Help, select Install new Software, press Add and browse for the archive and follow the instructions.

That should be all.

The only thing to do is to please check to don't have some blank spaces in the path, like "MATLAB AddOns".

Hope this helps,

Marius

Re: Debugging Generated code on NXP S32DS ver 1.3

joshua_hong — Thu, 16 Sep 2021 06:18:09 GMT

Hi @viet,@mariuslucianand

I helped Viet to checked his setup.

Viet seem to use the Embedded Coder, instead of the Embedded Coder Support Package for ARM Cortex-M processors.

Viet will install the mentioned package, and update us the result.

Best Regards

Joshua

Re: Debugging Generated code on NXP S32DS ver 1.3

joshua_hong — Thu, 23 Sep 2021 02:57:43 GMT

Hi @viet , @mariuslucianand ,

turns out that the <LinkerOptList> <Option> has paths that has space characters.

if we remove the space characters in <LinkerOptList> <Option>, and import the ProjectInfo.xml into S32DS for ARM 2.2, the project will be imported with C/C++ Build option available.

Best Regard

Joshua

Field Application Engineer

WT Microelectronics