topic Re: i.MX RT - How To in Model-Based Design Toolbox (MBDT)

Re: i.MX RT - How To

Leon_Li1 — Thu, 26 Aug 2021 02:20:56 GMT

Hi,

I have installed MBDT successfully, I can generated code use the default folder path.

But if I move the gpio_polling example to a new folder, I cant build it ok.

The message as below:

Build Summary

Elapsed: 0.4 sec

Top model targets built: Model Action Rebuild Reason ====================================================================================== evkmimxrt1060_gpio_polling Failed Code generation information file does not exist. 0 of 1 models built (0 models already up to date) Build duration: 0h 0m 3.639s

文件标识符无效。使用 fopen 生成有效的文件标识符。

Matlab version is 2021a.

MBDT version is 1.2.0

Re: i.MX RT - How To

nxa11767 — Thu, 26 Aug 2021 08:43:33 GMT

Hi @Leon_Li1 ,

Did you extended error look like below?

This is caused by the initial model being created with an older version of matlab, and some things changed in the data storage options.

To fix the issue click on a small icon in the left lower corner, to open the model perspectives:

Enter the Code perspective, and in Data storage type, fix the error for the 'A' storage variable:

Hope this helps,

Alexandra

Re: i.MX RT - How To

Leon_Li1 — Thu, 26 Aug 2021 11:45:20 GMT

It is ok, thanks for your help.

Re: i.MX RT - How To

Leon_Li1 — Thu, 26 Aug 2021 11:52:59 GMT

Hi Alexandra,

I have a new qustion.

When I built the mc_pmsm example, the report massage as below:

If I use Matlab 2020a, this example can be built successfully,but matlab 2021a cant.

Re: i.MX RT - How To

nxa11767 — Wed, 01 Sep 2021 08:37:45 GMT

Hi @Leon_Li1 ,

We have a fix for the build error on 2021a.

Please find the attached zip file - it contains a .tcl file. Unzip it and copy the file to: RTCESL_imxrt\bam\AMCLIB\bam_a32fltfltflt\ and overwrite the existing one: AMCLIB_PMSMBemfObsrvDQ_SF_A32fff.tlc.

Best regards,

Alexandra