Model-Based Design Toolbox (MBDT)のトピックRe: PIL Simulation Error

PIL Simulation Error

alimeraj — Wed, 28 Jun 2017 11:59:48 GMT

Hi,

I am trying to run one of motor control toolbox example code on MPC5744P but when ever i hit the play button I get the following error.

No method 'getComponentBuildInfoPath' with matching signature found for class 'pntpil.MakefileBuilder'.

can you please tell me what is the issue here.

Regards,

Ali

Re: PIL Simulation Error

paulvlase — Wed, 28 Jun 2017 12:38:27 GMT

Hi alimeraj‌,

Can you tell us which version of Matlab and NXP Motor Control toolbox you are using?

Re: PIL Simulation Error

alimeraj — Wed, 28 Jun 2017 12:39:40 GMT

Hi Paul,

I am using 2014b

Regards,

Ali

Re: PIL Simulation Error

alimeraj — Wed, 28 Jun 2017 12:40:17 GMT

I am using V2.0 of Motor Control Toolbox

Re: PIL Simulation Error

Daniel_Popa — Wed, 28 Jun 2017 12:42:18 GMT

Hi alimeraj‌,

Can you tell us the example model you are trying to run ?

My suggestion is to start from this example:

Motor Control Class: Lecture 7 - Commutation Algorithm

There you have PIL setup video and also an example ready to run, attached.

Re: PIL Simulation Error

alimeraj — Wed, 28 Jun 2017 12:44:31 GMT

Hi,

I am trying to me this example work, the only difference i have is that I am using diab compiler.

Regards,

Ali

Re: PIL Simulation Error

paulvlase — Wed, 28 Jun 2017 12:45:27 GMT

Model Based Design Toolbox (the old name is Motor Control Toolbox) version 2.0 doesn't support R2014b, we support only the last 4 releases of Matlab, R2015a to R2016b.

I will try to offer you a patch to make it work on R2014b, if the change is small.

Re: PIL Simulation Error

alimeraj — Wed, 28 Jun 2017 12:51:54 GMT

Hi Paul,

I have 2017a as well, which gives me a following error when i try to configure model for PIL.

I am able to use the Toolbox for normal peripherial and direclty download to processor from simulink with both matlab versions (2014b and 2017a) its only the PIL which is not working.

Regards,

Ali

Re: PIL Simulation Error

Daniel_Popa — Wed, 28 Jun 2017 12:56:43 GMT

Hi alimeraj‌,

The DIAB compiler should be fine. Your problem is caused by Matlab changes in the PIL interfaces.

My colleague paulvlase is preparing a patch for you to enable the PIL working on 2014/2017 Matlab versions.

Stay tuned. Thank you!

Daniel

Re: PIL Simulation Error

alimeraj — Wed, 28 Jun 2017 12:58:33 GMT

Hi Dumitru,

Thank you very much for the help.

Kind Regards,

Ali Meraj

Re: PIL Simulation Error

paulvlase — Wed, 28 Jun 2017 15:33:10 GMT

Hi alimeraj‌,

It works as expected on R2017a.

I think you opened the PIL_model and PIL_verificaiton models in R2014b, and after that in R2017a.

Try this:

1) Run in PIL_verification.mdl from menu Tools > Freescale Model Based Design Toolbox for MPC574xP > To PIL Mode on MPC574xP.

2) Use in R2017a the clean models from the Lecture7.zip archive.

Re: PIL Simulation Error

alimeraj — Wed, 28 Jun 2017 15:41:39 GMT

Hi Paul,

I extracted lecture 7 files again and tried to run the model as following:

and it throws the error straight away:

Regards,

Ali

Re: PIL Simulation Error

alimeraj — Wed, 28 Jun 2017 15:42:01 GMT

I tried this 2017a

Re: PIL Simulation Error

paulvlase — Wed, 28 Jun 2017 15:53:57 GMT

Hotfix For R2014b

Follow these steps:

1) Replace MBDToolbox\mbdtbx_MPC574xP\mbdtbx_pnt\mbdtbx_pnt\+pntpil\MakefileBuilder.p with the attached file.

2) From Configuration Parameters set Solver type to "Fixed-step" and Fixed-step size to "1".

3) Run in PIL_verification.mdl from menu Tools > Freescale Model Based Design Toolbox for MPC574xP > To PIL Mode on MPC574xP.

Re: PIL Simulation Error

paulvlase — Wed, 28 Jun 2017 15:55:42 GMT

Can you post screenshots with "Code Generation" and "Hardware Implementation" (with "Device Details" expanded) sections from Configuration Parameters?

Re: PIL Simulation Error

alimeraj — Wed, 28 Jun 2017 15:58:32 GMT

Matlab 2017a config settings

Re: PIL Simulation Error

alimeraj — Wed, 28 Jun 2017 15:59:24 GMT

Thanks Paul, I will try this fix on 2014b tomorrow. I will update you as soon as I will test it.

thanks,

Ali

Re: PIL Simulation Error

paulvlase — Wed, 28 Jun 2017 15:59:33 GMT

Hi @ali_meraj,

I can reproduce your problem in R2017a when I run in PIL_verification.mdl Tools > Freescale Model Based Design Toolbox for MPC574xP > To PIL Mode on MPC574xP.

Thank you for reporting this error. I will post a hotfix for this.

Re: PIL Simulation Error

alimeraj — Thu, 29 Jun 2017 07:25:04 GMT

Hi Paul,

Thanks for looking into 2017a issue.

Regards,

Ali

Re: PIL Simulation Error

paulvlase — Thu, 29 Jun 2017 12:08:46 GMT

Hi alimeraj‌,

This is a hostfix to make the MBD Toolbox for MPC574xP run on R2017a.

Unzip it over theTOOLBOX_INSTALL_DIR. The default folder is C:\MBDToolbox\mbdtbx_MPC574xP .

Please try it and tell us if you have any problems.