topic How to go to the following path as shown in Quick start guide in Model-Based Design Toolbox (MBDT)

How to go to the following path as shown in Quick start guide

sutter_zhou — Thu, 29 Apr 2021 13:39:15 GMT

Re: How to go to the following path as shown in Quick start guide

mariuslucianand — Thu, 29 Apr 2021 14:11:09 GMT

Hello @sutter_zhou ,

If you refer to the Simulink library browser, you have 2 options to see it:

1. Go in any Simulink model, and you should find it under SIMULATION > Library Browser

2. type slLibraryBrowser in MATLAB Command Window

If you have installed the Toolbox but anything is missing, you can refresh the library by pressing the F5

Hope this helps,

Marius

Re: How to go to the following path as shown in Quick start guide

sutter_zhou — Thu, 29 Apr 2021 14:25:05 GMT

I'm not talking about the simulink library page. It is the left side of this picture that makes people confused. People need to navigate to a specific path to see this folder structure.

Re: How to go to the following path as shown in Quick start guide

mariuslucianand — Thu, 29 Apr 2021 19:18:33 GMT

Hello @sutter_zhou,

Sorry, my bad! All the MBDT toolboxes are installed in the MATLAB AddOns specific folder, which may differ for each user (everyone can select his own). To find your own or to change the default one, go to MATLAB -> Preferences and under Add-Ons you may find the toolbox location.

But, once the I.MXRT toolbox has been installed, you can type the following command in MATLAB's Command window: cd(mbd_find_imxrt_root) and this will change the Current Workspace to the one from the image.

Hope this helps,

Marius