https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-get-completely-raw-packed-CAN-message-in-Simulink-MBD/m-p/1263875#M5990 <P>Hi,</P><P>&nbsp;</P><P>We are building an electric vehicle control unit on the MPC-5744P daughter board. We need the Raw packed CAN message through the NXP block in the MBD Simulink. I am using the Fcan_Receive and FCAN_Receive_ISR block to receive all the CAN message. But the output of these blocks are the decoded CAN message into DATA, ID, TIMESTAMP.</P><P>&nbsp;</P><P>Is it possible to get the complete CAN message from any NXP block output in Simulink?</P><P>&nbsp;&nbsp;</P> Sun, 18 Apr 2021 09:14:30 GMT Alberos 2021-04-18T09:14:30Z https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-get-completely-raw-packed-CAN-message-in-Simulink-MBD/m-p/1263875#M5990 <P>Hi,</P><P>&nbsp;</P><P>We are building an electric vehicle control unit on the MPC-5744P daughter board. We need the Raw packed CAN message through the NXP block in the MBD Simulink. I am using the Fcan_Receive and FCAN_Receive_ISR block to receive all the CAN message. But the output of these blocks are the decoded CAN message into DATA, ID, TIMESTAMP.</P><P>&nbsp;</P><P>Is it possible to get the complete CAN message from any NXP block output in Simulink?</P><P>&nbsp;&nbsp;</P> Sun, 18 Apr 2021 09:14:30 GMT https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-get-completely-raw-packed-CAN-message-in-Simulink-MBD/m-p/1263875#M5990 Alberos 2021-04-18T09:14:30Z