Model-Based Design Toolbox (MBDT)中的主题 Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

How to export S32K144 MBDT Generated Code to S32 Design Studio

RajG — Wed, 03 Mar 2021 07:34:50 GMT

Hello community members, I was successful in importing the MATLAB MBDT code to S32 Design Studio using ".elf" file.

The MBDT model is working okay and my hardware is working as per design. But as I imported the design to S32 Design Studio it has some issues. I am attaching screenshot of the same.

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

ruihang_wu — Fri, 05 Mar 2021 21:26:30 GMT

I am seeing the same problem. Additionally I see a message saying "Corrupted build tools for project" in the console.

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

KathyPoole — Mon, 22 Mar 2021 18:19:47 GMT

In case you need to export the generated code to S32 Design Studio for PA IDE, now there is an easy way. No more painful job of reconstruction the project manually and setting all sort of compiler flags.

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

RajG — Fri, 12 Mar 2021 05:39:35 GMT

still no progress.... and I am using S32k144 so its S32DS for Arm and not PA so no such easy way @KathyPoole .
still required some guide to proceed.

Thanks and Regards,

RajG

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

mariuslucianand — Fri, 12 Mar 2021 11:52:01 GMT

Hello @RajG , @ruihang_wu ,

How do you import the project in S32DS? On my end, I've tried to import the generated code for the PMSM_OpenLoop_s32k144 model and I am able to build the generated code. Let me explain the steps:

1. Make sure that the Simulink model has the "Generated S32DS ProjectInfo.xml checked in the Config model.

2. Go to S32DS for ARM 2.2 go to File > Import, and under S32 Design Studio check the ProjectInfo.xml Importer

3. In the newly opened window, please select the ProjectInfo.xml file from the generated code, and make all the below checks.

4.Once the import process has been completed, open the PMSM_OpenLoop_s32k144.c and you should now able to build the project.

In my console log, you can see that the project has been successfully built and now you can go to the Debug configuration and start debugging the code on the board.

Hope this helps,

Marius

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

ruihang_wu — Fri, 12 Mar 2021 17:12:39 GMT

Hello Marius

Thank you for your reply.

I am doing the same thing as you bug after I import the project I get a message in the console saying "corrupted build tool for project : [project name]"

In addition I don't have the build option when I right click the project after importing

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

mariuslucianand — Fri, 12 Mar 2021 17:40:34 GMT

Hello @ruihang_wu,

Does it happen with all the Simulink models or only with your own model?

Can you please generate the code for the PMSM_OpenLoop_s32k144 project that comes with our toolbox and send the whole generated code to me (you can do so in private as well). I want to try to import it in my S32DS to see if the issue is caused by the generated code or the S32DS.

Regards,

Marius

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

ruihang_wu — Fri, 12 Mar 2021 20:20:45 GMT

Hello @mariuslucianand

Sorry for the late reply. I have attached the output folder after building the model. If I try to import the ProjectInfo file in this folder I still get the problems described before.

Thank you

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

RajG — Sat, 13 Mar 2021 05:40:43 GMT

hello @ruihang_wu @mariuslucianand
thanks for the reply.

I followed all the steps as mentioned above by @mariuslucianand but still facing same issue and i also tried to do same process with other models and it ended in same way that is not building...
(below is the screenshot of project I did using the steps provided.)

I also tried to import the project provided by @ruihang_wu and still faced same issue....

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

mariuslucianand — Sat, 13 Mar 2021 12:46:38 GMT

@RajG , @ruihang_wu ,

This is my output of the Console log when I import the generated code into the S32Design Studio.

Maybe the issue is from S32DS. Can you please show me the installation details of the S32DS for ARM? Go to Help > Installation Details.

I wonder if you need to install the S32 Design Studio for ARM 2.2 Update 1 S32 SDK for S32K1xx SR RTM 3.0.3

To show enable the build button please open one of the sources from the newly imported project. Can you please also attach the console log output error from from the build process?

Regards,

Marius

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

RajG — Mon, 15 Mar 2021 07:29:26 GMT

Below is the installation details of the S32DS for ARM:
I have also open file still build button doesn't shows up and console log output error is still similar to what I attached earlier I will again attach that same file.

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

Chennal — Tue, 16 Mar 2021 09:57:46 GMT

Same poblem，and message saying “Corrupted build tools for project”，installation details of the S32DS for ARM as same as your post.

@mariuslucianand

Thanks and Regards

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

ruihang_wu — Tue, 16 Mar 2021 15:20:35 GMT

Here is the installation details window. I am still running version 2.2

I remember this working before

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

mariuslucianand — Mon, 22 Mar 2021 11:57:42 GMT

Hello @ruihang_wu , @RajG

I had a look at the generated code once again, and the only difference that seems to have a connection with the fact that the Build button is missing is that some of the links from the Project.xml have some spaces.

From the attached example, I see that the toolbox is installed in the \AppData\Roaming\MathWorks\Matlab Add-Ons\ ...

I think the only way in which you can solve this is to install the toolbox in a path which contains no spaces. The easiest way is to uninstall our toolbox, go to Matlab ->Preferences -> Matlab -> Add-Ons and type a path with no spaces. Then reinstall again the MBDT toolbox and you will be able to import and build the generated code. For the best results, please use paths with no spaces for the model generated code folder as well.

Hope this helps,

Marius

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

ykarata1 — Tue, 15 Jun 2021 06:51:38 GMT

Dear @mariuslucianand ,

We have run into again blank character in the directory error and solved that.

When we try to flash and debug our SW, then we had realized that there are missing source and .h files. Also I have added them manually by copying .slprj folder to project folder.

Now, I can build successfully.

But when I flash SW to embedded system, I get error depicted below.

What is the problem? How can I solve that?

NOTE: I can flash different project succesfully with the same Hardware

Re: How to export S32K144 MBDT Generated Code to S32 Design Studio

sagarkapate — Tue, 03 Oct 2023 09:38:30 GMT

How to IMPORT Generated Code to S32 Design Studio ARM IDE (applicable for MBDT for S32K148)

I am going to the same problem after import build button is disable it can be build using this process.

please provide some solution on it.