topic Re: ADS problem of "XX is an instance of an undefined model XX" in Model-Based Design Toolbox (MBDT)

ADS problem of "XX is an instance of an undefined model XX"

qdong — Sat, 02 May 2020 11:42:52 GMT

I have a problem when I simulated in ADS2020 (Advanced Design System 2020).

When I started simulating with the model"A2G22S251_01S_MDL_ADS", the hpeesofsim had an error: "G50v3_4_lib_CG50v3-3_HEMT_r1_schematic.mikel' is an instance of an undefined model 'Cree_NL_GaN_HEMT ' ".

I have check some similar questions in the form.However, I have add both "A2G22S251_01S_MDL_ADS" and "RF-POWER-ADS2020v2p1-DK" to the library.

When use a diffrent model except "A2G22S251_01S", like"MRF6V2300N", "AFT20P060_4N", there was not the error and it simulates normally.

So I guess there is some problem with model "A2G22S251_01S"

Please help me with this problem, Thanks very much.

Re: ADS problem of "XX is an instance of an undefined model XX"

mariuslucianand — Mon, 04 May 2020 09:21:15 GMT

Hello 勤董 ,

This community space does not cover the topic you need assistance on. Please create a new thread on the Power Management space or new NXP support case according to the following procedurehttps://community.nxp.com/docs/DOC-329745

Hope this helps,

Marius

Re: ADS problem of "XX is an instance of an undefined model XX"

vanni91 — Thu, 15 Jul 2021 19:01:13 GMT

I am also finding the same issue, just wanted to know is your problem resolved now??

Re: ADS problem of "XX is an instance of an undefined model XX"

MohMor — Wed, 20 Jul 2022 13:11:26 GMT

here you can see how I solve this error. I hope it helps you:

https://www.youtube.com/watch?v=UrvMeU0AwM4

Best regards

Thank you