Model-Based Design Toolbox (MBDT)中的主题 Re: GDB server stuck, eval board MTRCKTSPS5744P

GDB server stuck, eval board MTRCKTSPS5744P

patel_reddy — Wed, 29 Apr 2020 21:57:01 GMT

Built project for eval board, MTRCKTSPS5744P, from inbuilt examples as per link in Getting Started with MTRCKTSPS5744P | NXP .

However during download process, the debug process stuck at 98%, ERROR seems to be at CRC mismatch.

Re: GDB server stuck, eval board MTRCKTSPS5744P

patel_reddy — Thu, 30 Apr 2020 00:51:28 GMT

Looking at the debug code (pasted below), it seems to be a CRC check fail. Eval code has not been modified from project example.

Loading programming algorithm ...
Done.
Programming sequency is : erase, blank check, program, and verify {default}
CMD>VC
Verifying object file CRC-16 to device ranges ...
block 00FA0000-00FA0007 ...
Ok.
block 01000000-01000291 ...
Calculated CRC-16 does not match block. (File = $06CF, Device = $79D8)
Current content of flash does not match application to be programmed

CMD>EM

Erasing.

Re: GDB server stuck, eval board MTRCKTSPS5744P

constantinrazva — Wed, 06 May 2020 10:43:03 GMT

Hello patel.reddy@harley-davidson.com ,

In this community we mainly handle questions regarding MATLAB/Simulink and our toolboxes - I would recommend you try the https://community.nxp.com/community/s32/mpc5xxx community, where you'll most likely find answers to your question.

Kind regards,

Razvan.

Re: GDB server stuck, eval board MTRCKTSPS5744P

patel_reddy — Tue, 12 May 2020 17:42:05 GMT

Reposted here. GDB server stuck, eval board MTRCKTSPS5744P Thanks!