Model-Based Design Toolbox (MBDT)のトピックRe: How to modify etimer MOTC_CLK https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-modify-etimer-MOTC-CLK/m-p/1080903#M4702 <HTML><HEAD></HEAD><BODY><P>Hello <A class="jx-jive-macro-user" href="https://community.nxp.com/people/wbj5238@163.com">wbj5238@163.com</A>‌,</P><P></P><P>Unfortunately, I can't see the image attached, but I assume that your question is related to how to change the default clock configuration that comes with our MPC Toolbox. So for a detailed explanation please have a look on this thread&nbsp;<A href="https://community.nxp.com/thread/517780">Clock Configuration of MPC5744P using MBD&nbsp;</A></P><P>But before performing any change please be sure that you read the Reference Manual and consider all the clock values constrains in hw.</P><P></P><P>Hope this helps,</P><P>Marius</P></BODY></HTML> Wed, 10 Jun 2020 07:33:50 GMT mariuslucianand 2020-06-10T07:33:50Z How to modify etimer MOTC_CLK https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-modify-etimer-MOTC-CLK/m-p/1080902#M4701 <HTML><HEAD></HEAD><BODY><P>The default is 80 MHz,</P><P><IMG height="323" width="300" /></P><P></P><P>who can help me？</P><P>thanks</P></BODY></HTML> Wed, 10 Jun 2020 05:35:18 GMT https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-modify-etimer-MOTC-CLK/m-p/1080902#M4701 wbj5238 2020-06-10T05:35:18Z Re: How to modify etimer MOTC_CLK https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-modify-etimer-MOTC-CLK/m-p/1080903#M4702 <HTML><HEAD></HEAD><BODY><P>Hello <A class="jx-jive-macro-user" href="https://community.nxp.com/people/wbj5238@163.com">wbj5238@163.com</A>‌,</P><P></P><P>Unfortunately, I can't see the image attached, but I assume that your question is related to how to change the default clock configuration that comes with our MPC Toolbox. So for a detailed explanation please have a look on this thread&nbsp;<A href="https://community.nxp.com/thread/517780">Clock Configuration of MPC5744P using MBD&nbsp;</A></P><P>But before performing any change please be sure that you read the Reference Manual and consider all the clock values constrains in hw.</P><P></P><P>Hope this helps,</P><P>Marius</P></BODY></HTML> Wed, 10 Jun 2020 07:33:50 GMT https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-modify-etimer-MOTC-CLK/m-p/1080903#M4702 mariuslucianand 2020-06-10T07:33:50Z